Owner's Manual
Table Of Contents
- Owners Manual
- Reset
- Features
- Video Conversion
- Speaker Setup - Audyssey Auto Setup
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Simple Setup Guide
- Connections
- Video Conversion
- Speakers - 7.1 Configuration
- Additional Speaker Configurations / Connections
- HDMI Connections
- Output to TV
- Blu-ray Disc Player
- DVD Player
- Set-Top Box
- Digital Video Recorder
- Digital Camcorder
- iPod Dock
- iPod / USB Device
- Antennas
- Record Player
- CD Player
- DENON LINK Connector
- Multi-Channel Input
- Preamp Output
- Home Network
- Remote Control Jacks
- RS-232 Connection
- Trigger Out Jacks
- ZONE2 / ZONE3 Connections
- Playback - Basic Operation
- Playback - Advanced Operation
- Settings
- Remote Control Operation
- Surround Modes & Parameters
- Video Signals & Monitor Output
- Glossary
- Troubleshooting
- Specs
- Index
- Addendum Sheet
- Napster Offer
- SIRIUS Brochure
- Warranty
118
ENGLISH
Switching the multi-zone input source to
the same input source as used in the MAIN
ZONE
This function is convenient for example when you want to listen to the
same song as the one playing in the MAIN ZONE while in a different
zone.
1
3UHVVZONE SELECTDQGVHWWR
=21(RU=21(
The currently selected multi-zone
indicator illuminates.
2
3UHVVM.ZONE CALLRQWKHVXE
UHPRWHFRQWUROXQLW
The multi-zone input source switches to
the MAIN ZONE’s input source.
NOTE
• This function cannot be used for the MAIN ZONE.
• When
M.ZONE CALL is pressed while the multi-zone power is off,
the multi-zone power turns on and the input source switches to the
MAIN ZONE’s input source.
Setting the zone for which the sub remote
control unit is used
(Zone select lock mode)
We recommend always using the sub remote control unit for the
same room. When this is done, the unit can be set so that the zone
does not switch when buttons are operated.
1
8VHWKHWLSRIDSHQWRSUHVV
ADVANCED SETUP
All the multi-zone indicators illuminate.
ADVANCED SETUP
2
6HOHFWWKHPXOWL]RQHWREHVHW
The selected multi-zone indicator
illuminates.
q To set to “MAIN ZONE”
Press
REPEAT.
w To set to “ZONE2”
Press
RANDOM.
e To set to “ZONE3”
Press
USB.
r To set to “ZONE4”
Press
ALL MUSIC/FAVORITES.
3
8VHWKHWLSRIDSHQWRSUHVVADVANCED SETUP
The multi-zone indicator turns off.
n To cancel
1
8VHWKHWLSRIDSHQWRSUHVV
ADVANCED SETUP
The currently selected multi-zone
indicator illuminates.
ADVANCED SETUP
2
3UHVVZONE SELECT
All the multi-zone indicator illuminates.
3
8VHWKHWLSRIDSHQWRSUHVVADVANCED SETUP
The multi-zone indicator turns off.
Operating the sub remote control unit
Setting the remote ID
When using multiple DENON AV receivers in the same room, make
this setting so that no AV receiver other than the desired one operates.
1
:KLOHSUHVVLQJMENUSUHVV
ADVANCED SETUPZLWKWKHWLS
RIDSHQ
The multi-zone indicator corresponding
to the currently selected remote ID
flashes.
ADVANCED SETUP
2
6HOHFWWKHUHPRWH,'WREHVHW
q To set to 1
Press
REPEAT.
The “M” indicator flashes.
w To set to 2
Press
RANDOM.
The “Z2” indicator flashes.
e To set to 3
Press
USB.
The “Z3” indicator flashes.
r To set to 4
Press
ALL MUSIC/FAVORITES.
The “Z4” indicator flashes.
3
:KLOHSUHVVLQJMENUSUHVVADVANCED SETUP
ZLWKWKHWLSRIDSHQ
The multi-zone indicator turns off.
NOTE
When changing a setting, be sure to set the same remote ID as this
unit’s (vpage105).
Resetting the settings
:KLOHSUHVVLQJZONE OFFSUHVV
ADVANCED SETUPZLWKWKHWLSRID
SHQ
All the multi-zone indicators flash four times,
then all the settings are restored to their
defaults.
ADVANCED SETUP