User's Guide

86
3
Set whether speakers are connected or not in Zone2 and their size parameters.
Select the speakers connected in Zone2 and the size parameters.
q Select the speaker.
w Select the parameter.
For a description of the different parameters,
see page 47.
６−１．Ｓｐｅａｋｅｒ Ｃｏｎｆｉｇ．
Ｓｕｒｒｏｕｎｄ
Ｓｐ．
Small None
Zone-2
６−１．Ｓｐｅａｋｅｒ Ｃｏｎｆｉｇ．
Ｆｒｏｎｔ Ｓｐ．
Ｃｅｎｔｅｒ Ｓｐ．
Ｓｕｂｗｏｏｆｅｒ
Ye s
No
Large
Small
Small None
Zone-2
Zone2 Center Sp.
Zone2 Front Sp.
Zone2 Subwoofer
Zone2 Surround Sp.
(Zone2 Surround back Sp.)
*
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)
Front : Small
*Z2 Sp Config.
4
Enter the setting.
The Zone Setup Menu reappears.
CH SEL
ENTER
(Main unit) (Remote control unit)
*
This is only displayed when “7.1ch” is
selected for the Zone2 channel output
setting at “7-1. Channel Setup”. (See
pages 97~100)
6-1. Setting the type of speakers for Zone2
• The composition of the signals output to each channels and the frequency response are adjusted automatically according to the combination of
speakers actually being used in Zone2.
1
１．Ｓｐｅａｋｅｒ Ｃｏｎｆｉｇ．
２．Ｓｕｂｗｏｏｆｅｒ Ｍｏｄｅ
３．Ｄｅｌａｙ Ｔｉｍｅ
４．Ｃｈａｎｎｅｌ Ｌｅｖｅｌ
５．Ｃｒｏｓｓｏｖｅｒ Ｆｒｅｑｕｅｎｃｙ
６．Ｖｉｄｅｏ Ｓｅｔｕｐ
７．Ｚｏｎｅ３／４ Ｔｏｎｅ／Ｃｈ Ｌｅｖ．
Ｅｘｉｔ
６．Ｚｏｎｅ Ｓｅｔｕｐ
Select “Speaker Config.” at the Zone Setup Menu.
2
Display the Speaker Config. screen as below.
Z2 Sp Config.
*Zone Setup
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)