User's Guide

82
5-4. Setting the Manual EQ Setup
１．２ｃｈ Ｄｉｒｅｃｔ／Ｓｔｅｒｅｏ
２．Ｄｏｌｂｙ Ｄｉｇｉｔａｌ Ｓｅｔｕｐ
３．Ａｕｔｏ Ｓｕｒｒｏｕｎｄ Ｍｏｄｅ
４．Ｍａｎｕａｌ ＥＱ Ｓｅｔｕｐ
Ｅｘｉｔ
５．Ａｄｖａｎｃｅｄ Ｐｌａｙｂａｃｋ
1
Select “Manual EQ Setup” at the Advanced Playback
Menu.
CH SEL
ENTER
(Main unit) (Remote control unit)
Adjust CH L/R
*Manual EQ
• Allows you to adjust the tonal quality of the various speakers (except the subwoofer) while listening to a music source.
５−４．Ｍａｎｕａｌ ＥＱ
Ｄｅｆａｕｌｔ Ｙｅｓ
Ｂａｓｅ Ｃｕｒｖｅ Ｃｏｐｙ
Ａｄｊｕｓｔ ＣＨ Ｌ／Ｒ ＣＨ
Ｅｘｉｔ
2
Display the Manual EQ screen.
CH SEL
ENTER
Manual EQ Setup
*Advanced Play
(Main unit) (Remote control unit)
3
(Main unit)
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
Select the adjustment mode, then press the ENTER button.
All CH : All channels can be adjusted simultaneously.
L/R CH : The left and right channels of the pair of speakers can be adjusted simultaneously.
Each CH : The channels can be adjusted separately.
(Main unit)
(Remote control unit)
4
CH SEL
ENTER
(Main unit) (Remote control unit)
Select the speaker to be set.
The display changes as follows.
!!Ｍａｎｕａｌ ＥＱ Ｆｒｏｎｔ Ｌ／Ｒ
６３㎐ ０．０
ｄＢ
１２５㎐ ０．０ ｄＢ
２５０㎐ ０．０ ｄＢ
５００㎐ ０．０ ｄＢ
１ｋ㎐ ０．０ ｄＢ
２ｋ㎐ ０．０ ｄＢ
４ｋ㎐ ０．０ ｄＢ
８ｋ㎐ ０．０ ｄＢ
１６ｋ㎐ ０．０ ｄＢ
６３
１２５ ２５０ ５００
１ｋ ２ｋ ４ｋ ８ｋ
１６ｋ
−２０
−
６
０
＋ ６
q Select “L/R CH”
Example: When “L/R CH” is selected.
FL/FR
SBL/SBR
C
SLA/SRA
SLB/SRB
w Select “Each CH”
FL
SBR
1spkr
FR
C
SLA
SLB
SRB
SBL
SRA
SB
When the surround back speaker setting is set to “1spkr” at “Speaker Configuration”, this
is set to “SB”.
e Select “All CH”
In this case, speaker selection is not performed.
If a value is already set for the FL channel, the data stored for the FL channel is displayed.
Front L/R
*Manual EQ:L/R