User's Guide

70
Repeat step 5 to input the preset channel name.
6
(Main unit)
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
If you wish to set the preset channel name back to as it was initially, press the Cursor down
button with the preset channel name highlighted.
If “Yes” is selected for “Default”, the setting are automatically reset to the default name.
7
Once all the characters have been input, press the ENTER button.
The Preset Name screen reappears.
Use the same procedure to change other input source names as well.
CH SEL
ENTER
(Main unit) (Remote control unit)
8
When the Cursor down button is pressed at the very
bottom of the screen, the screen for the next preset
memory block appears.
It is also possible to select the desired preset
memory block by selecting “Block” then pressing
the Cursor left and right buttons.
CH SEL
ENTER
(Main unit) (Remote control unit)
３−７．Ｐｒｅｓｅｔ Ｎａｍｅ
Ｂｌｏｃｋ Ｂ
Ｂ２ ＡＭ ６００ｋ㎐：
Ｂ３ ＡＭ １０００ｋ㎐：
Ｂ４
ＡＭ １４００ｋ㎐：
Ｂ５
ＡＭ １５００ｋ㎐：
Ｂ６ ＡＭ １７１０ｋ㎐：
Ｂ７ ＦＭ ９０．１０Ｍ㎐：
Ｂ８ ＦＭ ９０．１０Ｍ㎐：
Ｂ１
ＡＭ ５２０ｋ㎐：
9
Enter the setting.
The Audio Input Setup Menu reappears.
10
Select “Exit” and press the ENTER button at the
Audio Input Setup Menu screen.
The System Setup Menu reappears.
CH SEL
ENTER
(Main unit) (Remote control unit)
(Main unit)
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
１．Ｄｉｇｉｔａｌ Ｉｎ Ａｓｓｉｇｎ
２．ＥＸＴ．ＩＮ Ｓｅｔｕｐ
３．Ｉｎｐｕｔ Ｆｕｎｃｔｉｏｎ Ｌｅｖ．
４．Ｆｕｎｃｔｉｏｎ Ｒｅｎａｍｅ
５．ＩＥＥＥ１３９４ Ａｓｓｉｇｎ
６．ＩＥＥＥ１３９４ Ａｕｔｏ Ｆｕｎｃ．
７．Ｔｕｎｅｒ Ｐｒｅｓｅｔｓ
Ｅｘｉｔ
３．Ａｕｄｉｏ Ｉｎｐｕｔ Ｓｅｔｕｐ
Exit
*Audio In Setup
３−７．Ｐｒｅｓｅｔ Ｎａｍｅ
Ａ１
ＦＭ ８７．５０Ｍ㎐： ＷＭＪＸ−ＦＭ
Ｙｅｓ
Default
Rename Clear
Name A1
３−７．Ｐｒｅｓｅｔ Ｎａｍｅ
Ａ１ ＦＭ ８７．５０Ｍ㎐： ＷＭＪＸ−ＦＭ
Ｙｅｓ
Default
Default : Yes
Name A1