User's Guide

108
7
Press the ENTER button to return to the Trigger Out screen.
Use the same procedure to make the settings for Trigger Out 2, 3, 4.
CH SEL
ENTER
(Main unit) (Remote control unit)
6
If “MAIN” was selected at step 4, the trigger out
jack’s output setting can also be made for the
various surround modes.
ＴＨＸ／ＤＯＬＢＹ／ＤＴＳ
ＣＩＮＥＭＡ ：
ＭＵＳＩＣ ：
ＧＡＭＥ ：
ＷＩＤＥ ＳＣＲＥＥＮ ：
９ＣＨ ＳＴＥＲＥＯ ：
ＤＳＰ ＳＩＭＵＬＡＴＩＯＮ ：
ＭＵＬＴＩ ＣＨ ＭＯＤＥ ：
ＤＩＲＥＣＴ／ＳＴＥＲＥＯ ：
ON
ON
ON
ON
ON
ON
ON
ON
DRCT/ST : ON
*Trigger Out 1
q Select the surround mode. w Select “ON” or “OFF”.
ON : If that surround mode is selected when an input source set to “ON” is selected, the power supplied from the trigger out jack turns
on.
OFF : If that surround mode is selected when an input source set to “ON” is selected, the power supplied from the trigger out jack turns
off.
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)
8
Select “Exit” then press the ENTER button at the
Trigger Out screen.
The Option Setup Menu reappears.
Exit
*Trigger Out
Ｔｒｉｇｇｅｒ Ｏｕｔ １
Ｔｒｉｇｇｅｒ Ｏｕｔ ２
Ｔｒｉｇｇｅｒ Ｏｕｔ ３
Ｔｒｉｇｇｅｒ Ｏｕｔ ４
Ｄｅｆａｕｌｔ
Ｅｘｉｔ
７−４．Ｔｒｉｇｇｅｒ Ｏｕｔ
Ye s
(Main unit)
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
If “Yes” is selected for “Default”, the setting are
automatically reset to the default values.