User's Guide
Table Of Contents
- ENGLISH
- 1. BEFORE USING
- 2. CAUTIONS ON INSTALLATION
- 3. CAUTIONS ON HANDLING
- 4. FEATURES
- 5. PART NAMES AND FUNCTIONS
- 6. READ THIS FIRST
- 7. SETTING UP THE SPEAKER SYSTEMS
- 8. CONNECTIONS
- 9. USING THE REMOTE CONTROL UNIT
- 10. SETTING UP THE SYSTEM
- 11. REMOTE CONTROL UNIT
- 12. OPERATION
- 13. SURROUND
- 14. DSP SURROUND SIMULATION
- 15. LISTENING TO THE RADIO
- 16. LAST FUNCTION MEMORY
- 17. INITIALIZATION OF THE MICROPROCESSOR
- 18. ADDITIONAL INFORMATION
- 19. TROUBLESHOOTING
- 20. SPECIFICATIONS
- LIST OF PRESET CODES
- FRANCAIS
- 1. AVANT L‘UTILISATION
- 2. PRECAUTIONS D’INSTALLATION
- 3. PRECAUTIONS DE MANIPULATION
- 4. CARACTERISTIQUES
- 5. NOMENCLATURE ET FONCTIONS
- 6. A LIRE EN PREMIER
- 7. RÉGLAGE DES SYSTÈMES D’ENCEINTE
- 8. CONNEXIONS
- 9. UTILISATION DE LA TÉLÉCOMMANDE
- 10. INSTALLATION DU SYSTEME
- 11. UNITE DE TELECOMMANDE
- 12. OPERATION
- 13. AMBIANCE
- 14. SIMULATION D’AMBIANCE DSP
- 15. ECOUTER DE LA RADIO
- 16. MEMOIRE DE DERNIERE FONCTION
- 17. INITIALISATION DU MICROPROCESSEUR
- 18. INFORMATIONS SUPPLEMENTAIRES
- 19. DEPISTAGE DES PANNES
- 20. SPECIFICATIONS
- LISTE DE CODES PRÉRÉGLÉS
17
ENGLISH
Before setting up the system
1
2
Press the SYSTEM button to enter the setting.
Check that all the components are correct, then press the POWER operation switch on the main unit or
the POWER button on the remote control unit to turn on the power.
3
Press the SELECT or (down) button to switch to the speaker configuration set up.
*SYSTEM SET UP
NOTE:
Press the SYSTEM button again to finish system set up. System set up can be finished at any time. The changes to the settings made up to
that point are entered.
NOTE: Please make sure the “AUDIO” position of the slide switch on the remote control unit.
(Main unit) (Remote control unit)
Setting the speaker configuration
1
Use the (left) and (right) buttons to select your front speaker type.
1 FRONT LARGE
LARGE
SMALL
(left) button (right) button
Press the SELECT or (down) button to switch to the center speaker setting.
2
Use the (left) and (right) buttons to select your center speaker type.
2 CENTER SMALL
LARGE
SMALL
NONE
(left) button (right) button
Press the SELECT or (down) button to switch to the surround speaker setting.
3
Use the (left) and (right) buttons to select your surround speaker type.
3 SURR. SMALL
LARGE
SMALL
NONE
(left) button (right) button
Press the SELECT or (down) button to switch to the subwoofer setting.
NOTE:
• When “Small” has been selected for the front speakers, “Large” cannot be selected for the center speaker.
(Initial)
(Initial)
(Initial)