DENON AVR/AVC control protocol Ver. 4.4 Application model : AVR-4806/AVC-A11XV Application terminal : RS-232C/ Ethernet Connector specification Ⅰ .
Ⅱ .
NETWORK SETUP of AVR-4806/AVC-A11XV >Procedure of Network Setup mode. (1)Push the POWER switch during STANDARD button and INPUT MODE button press simultaneously. (2)Press SYSTEM SETUP button, then System Setup Menu appears on FL-display(and OSD) (3)Select Option Setup and select Network Setup. (4)Set parameters described below. "ON"---Use this setting when DHCP server is on the local network. "OFF"---Use this setting when DHCP server is not on the local network.
Protocol specification The following three data forms is defined. COMMAND : The message sent to a system(AVR/AVC) from a controller(Touch Panel etc.) A command to a system is given from a controller. EVENT : The message sent to a controller(Touch Panel etc.) from a system(AVR/AVC) The result is sent, when a system is operated directly and a state changes. *The form of EVENT presupposes that it is the same as that of COMMAND. **Refer to the following table for the contents of COMMAND and EVENT.
The example of a command * is the meaning of 0x0D.
Others A) COMMAND is receivable also during transmission of EVENT. B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE changes, the value of the channel volume of all channels returns as EVENT. C) CHANNEL VOLUME returns the data of ALL channels by the present SURROUND MODE also including an intact channel. In this case, the data of an intact channel is set to "50".
COMMAND and PARAMETER list COMMAND PARAMETER function example ON POWER ON/STANDBY change PWON STANDBY PWSTANDBY MV UP MASTER VOLUME UP/DOWN , direct change to **dB MVUP DOWN MVDOWN ** **:00 to 99 by ASCII , 80=0dB, 99=---(MIN) MV80 CV FL UP CHANNEL VOLUME UP/DOWN , direct change to **dB CVFL UP FL DOWN ---FRONT Lch CVFL DOWN FL ** **:38 to 62 by ASCII , 50=0dB CVFL 50 FR UP CVFR UP FR DOWN ---FRONT Rch CVFR DOWN FR ** **:38 to 62 by ASCII , 50=0dB CVFR 50 C UP CV
COMMAND PARAMETER function SB UP ---SURROUND BACKch (SBch 1SP) SB DOWN SB ** **:00 to 99 by ASCII , 50=0dB MU ON OUTPUT MUTE ON/OFF change OFF SI PHONO Select INPUT source CD TUNER DVD VDP TV DBS VCR-1 VCR-2 VCR-3 V.AUX CDR/TAPE ZM ON MAIN-ZONE ON/OFF change at AVR-4806 OFF Z2 PHONO MULTI ZONE-2 mode set , and select source at AVR-4806 | ---The name of PARAMETER is CDR/TAPE the same as that of the time of SI COMMAND.
COMMAND PARAMETER function PHONO MULTI ZONE-3 mode set , and select source at AVR-4806 | ---The name of PARAMETER is CDR/TAPE the same as that of the time of SI COMMAND.
EVENT MS PARAMETER DIRECT PURE DIRECT STEREO MULTI CH IN MULTI CH DIRECT MULTI CH PURE D DOLBY PRO LOGIC DOLBY PL2 DOLBY PL2x DOLBY DIGITAL DOLBY D EX DTS NEO:6 DTS SURROUND DTS ES DSCRT6.1 DTS ES MTRX6.1 DOLBY H/P DTS+DOLBY H/P HOME THX CINEMA THX5.1 THX U2 CINEMA THX MUSIC MODE THX GAMES MODE THX6.
EVENT MS PS PARAMETER VIRTUAL MPEG2 AAC AAC+DOLBY EX USER1 USER2 USER3 TONE DEFEAT ON TONE DEFEAT OFF SB:MTRX ON SB:NON MTRX SB:PL2xCINEMA SB:PL2xMUSIC SB:OFF CINEMA EQ.ON CINEMA EQ.
EVENT TF TP PARAMETER function UP TUNER Frequency UP/DOWN , direct change DOWN ****** (6 digits) --- ****.** kHz at AM band (>050000 is AM.) ****.** MHz at FM band (<050000 is FM.) XM*** --- *** at XM mode (channel No.) UP TUNER PRESET CH UP/DOWN , direct change to No.** DOWN **(PRESET No.) TM example TFUP TFDOWN TF105000 (1050.00kHz at AM) TFXM001 (channel 1 at XM) TPUP TPDOWN TPA1 (PRESET No.
EVENT(or RESPONSE) and PARAMETER list EVENT PW MV CV PARAMETER ON STANDBY ** function POWER ON/STANDBY change MASTER VOLUME change , **:00 to 99 by ASCII 98 = +18dB(MAX) 80 = 0dB 00 = -80dB 99 = ---(MIN) CHANNEL VOLUME change , **:00,38 to 62 by ASCII 62 = +12dB(MAX) 50 = 0dB 38 = -12dB(MIN) 00 = OFF (define ONLY SWch in DIRECT mode.
EVENT ZM Z2 Z2MU Z3 PARAMETER ON OFF PHONO | CDR/TAPE SOURCE ** ON OFF ON OFF PHONO | CD/TAPE SOURCE ** function MAIN-ZONE ON/OFF change MULTI ZONE-2 source change ---The name of PARAMETER is the same as that of the time of SI COMMAND.
EVENT TF TP PARAMETER function ****** (6 digits) TUNER Frequency change --- ****.** kHz at AM band ****.** MHz at FM band XM*** --- *** at XM mode (channel No.) **(PRESET No.) TUNER PRESET change to No.** TM TUNER BAND , MODE change AM ---Band set to AM FM ---Band set to FM XM ---Band set to XM AUTO ---Tuning mode set to AUTO mode MANUAL ---Tuning mode set to MANUAL mode *RES. : NOT returns '*' parameters as RESPONSE. - 15 - example TF105000 (1050.00kHz at AM) *RES.
EVENT MS PARAMETER function DIRECT SURROUND mode change PURE DIRECT STEREO MULTI CH IN MULTI CH IN +PL2x CINEMA MULTI CH IN +PL2x MUSIC MULTI CH DIRECT MULTI CH DIRECT +PL2x CINEMA MULTI CH DIRECT +PL2x MUSIC MULTI CH PURE D MULTI CH PURE D +PL2x CINEMA MULTI CH PURE D +PL2x MUSIC DOLBY PRO LOGIC DOLBY PL2 CINEMA DOLBY PL2 MUSIC DOLBY PL2 GAME DOLBY PL2x CINEMA DOLBY PL2x MUSIC DOLBY PL2x GAME DOLBY DIGITAL DOLBY D EX DOLBY D +PL2x CINEMA DOLBY D +PL2x MUSIC - 16 - example MSDIRECT MSPURE DIRECT
EVENT PARAMETER DTS NEO:6 CINEMA DTS NEO:6 MUSIC DTS SURROUND DTS ES DSCRT6.1 DTS ES MTRX6.1 DTS+PL2x CINEMA DTS+PL2x MUSIC DOLBY H/P DTS+DOLBY H/P PL2x C+THX PL2 C+THX PL+THX NEO:6 C+THX THX5.1 THX U2 CINEMA THX MUSIC MODE THX GAMES MODE THX6.
EVENT MS PS PARAMETER VIRTUAL MPEG2 AAC AAC+DOLBY EX AAC+PL2x CINEMA AAC+PL2x MUSIC USER1 USER2 USER3 ROOM EQ:AUDYSSEY ROOM EQ:FRONT ROOM EQ:FLAT ROOM EQ:MANUAL ROOM EQ:OFF DELAY *** ---Invalid ---Invalid ---Invalid ---Invalid ---Invalid at at at at at function AVR-4806 model AVR model AVR model AVR model AVR model ROOM EQ mode direct change AUDIO DELAY change, ***:000 to 999 by ASCII ---AVR-4806：200=200ms（MAX） 100=100ms, 000=0ms - 18 - example MSVIRTUAL MSMPEG2 AAC MSAAC+DOLBY EX MSAAC
