Operating instructions

ManualsBrandsDenon ManualsMusical InstrumentsAVR 4806 - AV Receiver

125

Advanced Setup – Part 2

4

Press the CURSOR

DD

or

HH

button to select the

Equalizer curve, then press the

ENTER button.

• Display the “EQ Check” screen.

The display is only an approximate picture of the

response and that correction is happening at all

frequencies.

5

Press the CURSOR

FF

or

GG

button to select the

speaker channel.

6

If the check ends, pressing the CURSOR

DD

or

HH

button to select the “Exit”, then press the

ENTER button.

• The “EQ Parameter Check” screen reappears.

9

Press the CURSOR

DD

or

HH

button to select the

“Exit”, then press the

ENTER button.

• The “Auto Setup / Room EQ” menu reappears.

10

Press the CURSOR

DD

or

HH

button to select the

“Exit”, then press the

ENTER button.

• The “System Setup Menu” reappears.

7

Press the CURSOR

DD

or

HH

button to select the

“Exit”, then press the

ENTER button.

• The “Parameter Check” screen reappears.

The results of the “Auto Setup” procedure can

be reset even if the settings have been changed

after performing the “Auto Setup” procedure:

Press the

CURSOR

DD

or

HH

button to select the

“Restore Yes

0

”, then press the CURSOR

FF

button.

8