User's Guide

0
Getting Started Connections Playback Remote Control Multi-Zone Information Troubleshooting
Front Rear
All One OFF
ON OFF
Assign None
NET/USB
iPod dock
Assign Control Dock for iPod to this source.
CD DVD HDP TV/CBL SAT VCR
DVR V.AUX
[Input source]
[Selectable items]
A0
Playback Mode
Make settings for “NET/USB” playback.
[Input source]
USB Select
Select USB port to use.
[Selectable items]
[Selectable items]
[Selectable items]
Repeat
Make settings for repeat mode.
Random
Make random mode settings.
Favorites All Music
Direct Play
Set the folder to be played using the DIRECT PLAY button on the sub
remote control unit.
[Selectable items]
Input
source
DVD HDP TV/CBL SAT VCR DVR V.AUX
Default
setting
Component
1
Component
2
Component
3
None None None None
Match the port to be used and the setting.
Coaxial1 ~ 3 Optical1 ~ 4
DENON LINK
z
None
CD DVD HDP TV/CBL SAT
VCR DVR V.AUX
Digital
Select digital input connector to assign to this source.
[Input source]
[Selectable items]
z: When a DENON DVD player and the DENON LINK have been
connected, be sure to make a setting to “DENON LINK”.
NOTE
• This cannot be set for input sources for which “iPod dock” is
assigned.
• When an input source to which “DENON LINK” has been assigned
is selected in the MAIN ZONE, the PCM signal and network audio
signal (Internet radio, music server or USB) input from the digital
input connector cannot be output to the analog REC OUT connector
or multizone.
Component
Select component video input to assign to this source.
1 2 3 None
DVD HDP TV/CBL SAT VCR
DVR V.AUX
[Input source]
[Selectable items]
Input
source
CD DVD HDP TV/CBL SAT VCR DVR V.AUX
Default
setting
Coaxial
3
Coaxial
1
None
Coaxial
2
Optical
1
Optical
3
Optical
2
Optical
4
• With the default settings, the Control Dock for iPod can be used
connected to the VCR (iPod) connector.
• Even if “iPod dock” is set to “Assign”, if the AVR-3808CI is not
connected to a Control dock for iPod, the input source can be used
as the normal input source.
• With HDMI, the video and audio signals are transferred simultaneously.
When HDMI is assigned to an input source, the audio signal switches
to HDMI along with the video signal. To use with the digital audio
input connectors assigned, set GUI menu “Input Mode” to “Digital”
(vpage 38, 39).
• When the AVR-3808CI and monitor are connected with an HDMI
cable, if the monitor is not compatible with HDMI audio signal
playback, only the video signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the monitor.
NOTE
This cannot be set for input sources for which “iPod dock” is
assigned.
1 2 3 4 None
DVD HDP TV/CBL SAT VCR
DVR V.AUX
l
Assign
Assign input sources to input connectors.
HDMI
Select HDMI connector to assign to this source.
[Input source]
[Selectable items]
Input
source
DVD HDP TV/CBL SAT VCR DVR V.AUX
Default
setting
HDMI1 HDMI2 HDMI3 None None HDMI4 None
NOTE
This cannot be set for input sources for which “iPod dock” is
assigned.
Setup