User's Guide
GUI Menu Map Playback Information Troubleshooting
ENGLISH
Input
source
DVD HDP TV/CBL SAT VCR DVR V.AUX
Default
setting
Component
1
Component
2
Component
3
None None None None
Component
Select component video input to assign to this source.
[Input source]
[Selectable items]
NOTE
This cannot be set for input sources for which “iPod dock” or “SIRIUS“
is assigned.
1
2
3
None
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
Assign
None
SIRIUS
Assign SIRIUS to this source.
CD
DVD
HDP
TV/CBL
SAT
VCR
DVR
V.AUX
[Input source]
[Selectable items]
NOTE
• “SIRIUS” and “iPod Dock” cannot both be assigned.
• When “SIRIUS” is assigned to the input source, “232C Port”
(vpage 5) cannot be set. In addition, External Controller and 2-way
Remote cannot be used.
Parameter
Audio
Adjust various audio parameters.
F Menu tree F
Parameter
Audio
a Surround Parameters
s Audyssey Settings
a
Surround Parameters
Adjust surround sound parameters.
The adjustable parameters differ for the different surround
modes.
NON MTRX
MTRX ON
PL
II
x CINEMA
z1
PL
II
x MUSIC
z2
ES MTRX
z3
ES DSCRT
z4
DSCRT ON
OFF
z1: This can be selected when “Surround Back” is set to “2spkrs”
at the GUI menu “Manual Setup” – “Speaker Setup” – “Speaker
Configuration” setting.
z2: This can be selected when “Surround Back” is set to “2spkrs”
or “1spkr” at the GUI menu “Manual Setup” – “Speaker Setup”
–“Speaker Configuration” setting.
z3: This can be selected when playing DTS sources.
z4: This can be selected when playing DTS sources including a
discrete 6.1-channel signal identification signal.
SB CH Out (for Multi-channel sources)
Select playback mode for surround back channels.
[Selectable items]
When using the surround back speaker, you can change the “SB
CH Out” setting by pressing STANDARD.
s
Audyssey Settings
Select Room EQ, Dynamic EQ and Dynamic Volume.
Room EQ
[Selectable items]
Audyssey
: Optimize frequency response of all speakers.
Audyssey Byp. L/R
: Optimize frequency response of speakers
except front L and R speakers.
Audyssey Flat
: Optimize frequency response of all speakers
to flat response.
Manual
: Apply frequency response set with “Manual
EQ”.
OFF
: Turn equalizer off.
Operating from the main unit or main remote
control unit
Press ROOM EQ.
Audyssey Audyssey Byp. L/R
Audyssey Flat
Manual
OFF
• When “Audyssey”, “Audyssey Byp. L/R” or “Audyssey Flat” is
selected, “ ” lights.
• After running Auto Setup, if the Speaker Configuration, Distance,
Channel Level, and Crossover Frequency have changed without
increasing the number of speakers measured, only “
”
lights.
• “Audyssey”, “Audyssey Byp. L/R” and “Audyssey Flat” can be
selected after the auto setup procedure has been performed.
• After performing “Auto Setup”, the “Room EQ” setting automatically
becomes “Audyssey”.
• If the settings of speakers for which “None” has been determined
at “Auto Setup” are changed, “Audyssey”, “Audyssey Byp. L/R”
and “Audyssey Flat” cannot be selected. Either perform Auto Setup
again, or return to the setting after running Auto Setup with “Auto
Setup” – “Parameter Check” – “Restore”.
• When using headphones or EXT. IN mode, “Room EQ” cannot
used.
Setup
z: When a DENON DVD player and the DENON LINK have been
connected, be sure to make a setting to “DENON LINK”.
NOTE
• This cannot be set for input sources for which “iPod dock” is
assigned.
• When an input source to which “DENON LINK” has been assigned
is selected in the MAIN ZONE, the PCM signal and network audio
signal (Internet radio, music server or USB) input from the digital
input connector cannot be output to the analog REC OUT connector
or multizone.
Input
source
CD DVD HDP TV/CBL SAT VCR DVR V.AUX
Default
setting
Coaxial
3
Coaxial
1
None
Coaxial
2
Optical
1
Optical
3
Optical
2
Optical
4
When “HDMI Control” is set to “ON”, the digital input connector
assigned to ”TV/CBL” changes to “Optical3”.