User's Guide


GUI Menu Map Playback Information Troubleshooting
ENGLISH
Option Setup
Make various other settings.
F Menu tree F
Manual Setup
Option Setup
a GUI
s Remote (SIRIUS/XM)
d 232C Port
f Add New Feature
a
GUI
Make GUI related settings.
Master Volume
Master volume display during adjustment.
[Selectable items] Bottom Top OFF
If the Master Volume display is superimposed on the film subtitles
making it difficult to see, select the “Top” setting.
s
Remote (SIRIUS/XM)
Set when operating SIRIUS from the main remote control unit.
Set the XM TUNER (DEV2) mode on the main remote control unit
to SIRIUS.
[Selectable items] TUNER (DEV2) : XM
TUNER (DEV2) : SIRIUS
NOTE
When set to “TUNER (DEV2) : SIRIUS”, TUNER (DEV2) mode cannot
be used for XM.
d
232C Port
Set when external controller or 2-way remote control unit is
connected.
[Selectable items]
Serial Control
: Set when using an external controller.
2Way Remote
: Set when using a 2-way remote control unit.
NOTE
When using a 2-way remote control unit (RC-7000CI and RC-7001RCI,
sold separately), set this to “2Way Remote”.
In this case, you can not use the RS-232C connector as an external
controller.
f
Add New Feature
Display the new features (payment required) which can be
purchased for downloading to the AVR-4308CI / AVR-3808CI and
upgrade.
When you purchase a new feature and register your user information,
“Registered” is displayed on this menu and you can proceed with the
upgrade.
When “Not Registered” is displayed on the Add New Feature screen,
you cannot upgrade.
To use the upgrade function, you should purchase an upgrade package
from the DENON website.
To purchase the package, you will need the ID number shown on this
screen.
To display the ID number on the screen, hold the <p> and <STATUS>
buttons down for 3 seconds or more.
When “SIRIUS” is assigned to the input source, “232C Port” cannot
be set.
Use this procedure to select the input source and make the settings
related to playing input sources.
Source Select
Settings Related to Playing
Input Sources
F Menu tree F
Source Select
TUNER
PHONO
CD, DVD, HDP, TV/CBL, SAT, VCR, DVR, V.AUX
a Play (iPod) (SIRIUS)
z
s Preset Skip
d Parental Lock
f Antenna Aiming
g Assign
Input Mode
Rename
Other
NET/USB
XM
HD Radio
z: “Play” is displayed for input sources for which “iPod dock” and
“SIRIUS“ are assigned.
a
Play (iPod) (SIRIUS)
The playback screen is displayed.
[Input source] TUNER NET/USB XM HD Radio
(
iPod SIRIUS
)
Setup
Upgrade Status
A list of the additional functions provided by the Upgrade will be
displayed.
Do not turn off the power or disconnect from the network during an
upgrade.