User's Guide
0
GUI Menu Map Setup Information Troubleshooting
ENGLISH
NOTE
Keep the power cord unplugged until the SiriusConnect Home Tuner
connection have been completed.
©2006 SIRIUS Satellite Radio Inc. “SIRIUS”, the SIRIUS dog logo,
and channel names and logos are trademarks of SIRIUS Satellite
Radio Inc.
When connecting digital of the SiriusConnect Home Tuner, perform
the setting “Source Select” – “(input source)” – “Assign” – “Digital”
from the GUI menu (vpage 6).
R
L
R
L
SiriusConnect Home Tuner
b When connecting
digital audio
1
Make the necessary preparations.
q Assign the SIRIUS input.
: ”Source Select” – “(input source)” – “Assign”–
”SIRIUS” (vpage 7)
w Change the TUNER(DEV2) setting on the main remote control unit
to SIRIUS.
: ”Manual Setup” – “Option Setup” –
”Remote (SIRIUS/XM)” (vpage 5)
2
Either turn <SOURCE SELECT> or press [SAT TU] to
select “SIRIUS”.
b When operating via the remote control unit, you cannot select
SIRIUS even by pressing
[SOURCE SELECT] to which SIRIUS has
been assigned.
3
When using the main remote control unit to operate,
press [TU] to select mode.
4
Use [ ] to select the channel.
When the channel is tuned in, the name of the song and artist
are displayed.
• The channel switches continuously when [ ] is pressed
and held.
• The song title, artist name, composer name, category and reception
level can be checked by pressing <STATUS>.
• The time (default : 30 sec) for which the on-screen display are
displayed can be set at GUI menu “Manual Setup” – “Option Setup”
– “GUI” – “Tuner”.
• The sub remote control unit can also be used for SIRIUS (vpage
12).
Basic Operation
There is no SIRIUS-dedicated input terminal for AVR-4308CI /
AVR-3808CI.
When using an audio input source not used by AVR-4308CI / AVR-
3808CI, assign SIRIUS to the source.
Playback
Input the SiriusConnect Home Tuner’s audio output to an audio
input terminal not used by AVR-4308CI / AVR-3808CI.
Assign “SIRIUS” to the audio input terminal source connected
to the SiriusConnect Home Tuner.
<Illustration : AVR-4308>