Specifications

9.2-ch AV SURROUND RECEIVER
AVR-4520
Network capable 9.2-ch AV Receiver with 11.2-ch Processing Circuit, Denon Link HD,
Audyssey Mult EQ XT32, Network-Hub, 4K Video and triple HDMI Output.
Supports the full Network functionality including DLNA1.5, AirPlay, Internet Radio
and Spotify to allow you to enrich your entertainment world.
9-ch discrete monaural construction
power amplifier
Premium Silver
Black
9 10
220 W (6 ohms JEITA) Fully Discrete
Power Amplifier with identical Quality
and Power for All 9-Channels
To faithfully reproduce the original surround
sound, each 9-ch power amplifier is
equipped with identical power specification
and sound quality. Since these power amps
also use discrete circuits configured with
parts strictly selected for their contribution
to high sound quality, the surround sound
playback is of impeccably high quality.
Signal paths are as short as possible to
keep signal degradation in the audio
circuitry to an absolute minimum.
Equipped with an input terminal for
the newly developed Denon Link HD
Jitter during digital transmission is reduced
significantly by Denon Link HD. The clock
for the digital transmission is supplied
from AV receiver to Blu-ray player through
an additional link cable for complete
synchronization between 2 units. Denon
Link HD is supported by the DBT-3313UD
in Blu-ray player category.
AL32 Processing Multi Channel
The acclaimed AL32 Processing Multi
Channel processing improves the fidelity
of 2-ch and multi channel sources including
PCM and bit streaming signals such as Dolby
and DTS by sophisticated DSP processing
algorithms that improves low level detail
and enhances fidelity by adaptive filtering
techniques. AL32 Processing Multi Channel
also provides increased dynamic range
and spatial information, bringing out all the
nuances with optimum clarity and fidelity.
Equipped with advanced multi-channel
surround sound, Audyssey DSX,
Dolby Pro Logic IIz and DTS Neo:X
This unit supports the Dolby Pro Logic
IIz that extends the space in the height
direction and the Audyssey DSX that also
extends it forward to allow you to enjoy
surround sound with the spread and depth
worthy of large-screen, high-definition
displays. DTS Neo:X delivers the most
flexible upmixing solution up to 11.1-ch for
high-end home theater systems.
Audyssey MultEQ XT32
It is the most accurate room equalization
solution with more than ten thousand
individual control points allowing finer details
of the room’s problems to be captured and
optimized. The ultra high resolution filters
are applied to all channels including the
subwoofers, with the most obvious benefit
being heard in the low frequency range
where correction is needed the most.
Equipped with 7 input and 2+1 output
HDMI terminals that fully support
next-generation 4K displays
Seven systems are provided for the 4K
video signal supporting HDMI input. One of
these systems is located at the front so that
you can easily enjoy video from a movie
camcorder, game console, or smart phone.
The HDMI output has a new terminal
for zone output in addition to 2 systems
capable of simultaneous output to allow the
HDMI input video and audio to be output to
a sub-zone independently.
Other functions
Stable power supply for high-quality
sound and image playback
Dynamic Discrete Surround Circuit,
D.D.S.C.-HD32 Digital with AL32
Processing Multi Channel, to dramatically
enhance the listening experience
192 kHz/32-bit D/A converters for
all channels
Supports DSD audio signal input from
HDMI
Pure direct mode for enjoying
high-fidelity sound
Minimum signal path for clear audio and
video signal
Supports 4 ohms speakers
Compressed Audio Restorer
GUI overlay on HDMI
InstaPrevue
MHL Interface Compatible
4 Quick Select buttons
Supports multi-zone output for up to
4 zones
PHONO input
FM radio tuner
Sleep timer
Remote controller with Backlite and
LCD display
Large-capacity block capacitor
High-current schottky barrier diode
Inside of trap door
AVR-4520
9.2-ch AV Surround Receiver