User's Guide


Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Specifications
• This function automatically converts various formats of video signals input to the AVR-1909 into the
format used to output the video signals from the AVR-1909 to a monitor.
• The AVR-1909’s video input/output circuitry is compatible with the following four types of video signals:
Digital video signals: HDMI
Analog video signals: Component video, S-Video and Video
Video Conversion Function
GFlow of video signals inside the AVR-1909H
High picture
quality playback
HDMI connector
Component video
connectors
S-Video connector
Video connector
Monitor
HDMI connector
Component video
connectors
S-Video connector
Video connector
Video input
terminals
Monitor output
terminals
: When 480i/576i signals are input
NOTE
• HDMI signals cannot be converted into analog signals.
• 1080p component video input signals cannot be output to anything other than component video
connectors.
• 480p/576p, 1080i and 720p component video input signals cannot be converted into S-Video or Video
format.
• When a non-standard video signal from a game machine or some other source is input, the video
conversion function might not operate.
• When not using this function, connect a monitor output with the same type of connector as the video
input connector.
• The resolution of the HDMI input-compatible monitor connected to the AVR-1909 can be checked at
menu “Information” – “HDMI Information” (vpage 53).

Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
About On-screen Displays due to Input Signals
The method of on-screen display (OSD) varies with the type of video signal input to AVR-1909.
Video signal being used Menu display
Momentary status display
when operating
(Display when changing the input
source, volume, etc.)
HDMI connector /
Component video connectors
OSD only display Turn display off
S-Video connector /
Video connector
Display of OSD superimposed on
the input image
Turn display on