Operation Manual

ENGLISH
• When viewing HOMI or component video signals via the AVR-1909, the on-screen display appears when
the
MENU button on the main unit or the A.MENU button on the main remote control unit is operated.
• When only HOMI or component video signals are input to the AVR-1909, the characters of the on-screen
display are not displayed over the picture.
~
Video connector
HOMI connector
Y PWC. PNCR
~~~
Component video Monitor
connectors
.0
@)
S-Video connector
'=
High picture 1= 1+ l§l l>
quality playback '=----.===-' I HOMI connector ~
Y pwc. PNCR / / /
'=-[= ------.:o-'J+ ~ ~ ~ ::" / / A
I
Component video \')",,71/
connectors /",0 """
J+
1
0 ?/~).()
S-Video connecto~ ;"",,\
'--I,=-= ==:J+ ~ V .
Video connector
[Flow of video signals inside the AVR-1909]
• This function automatically converts various formats of video signals input to the AVR-1909 into the
format used to output the video signals from the
AVR-1909 to a monitor.
•
The AVR-1909's video input/output circuitry is compatible with the following four types of video signals:
Digital video signals: HOMI
Analog video signals: Component video, S-Video and Video
I
Video input
terminals
Monitor output
terminals
- - - - : When 480i/576i signals are input
.::!"-.
.. '
• When not using this function, connect a monitor output with the same type of connector as the video
input connector.
·The resolution of the HOMI input-compatible monitor connected to the AVR-1909 can be checked at
menu "Information" -
"HOMllnformation" (G"'page 53).
'~(.}j.
• HOMI signals cannot be converted into analog signals.
• 1080p component input video signals cannot
be output to anything other than component video
connectors.
• 480p/576p, 1080i
and nop component video input signals cannot be converted into S-Video or Video
format.
• When a non-standard video signal from a game machine or some other source
is input, the video
conversion function might not operate.
9