Operation Manual

ENGLISH
Amp Assign Connections and Operations
The AVR-1908 is compatible with the following types of playback:
• 5.1-channel playback 2-channel playback
• Bi-amp playback (front speakers)
NOTE
• For bi-amp playback, use speakers compatible with that type of connection.
• When conducting bi-amp playback, remove the short-circuiting boards (or wires) from the speaker
terminals.
Settings with the Amp Assign Function
The Amp Assign function lets you assign the amplifiers for the different channels built into the AVR-1908 to
the speaker outputs for the different zones.
Select the desired playback environment from among “Setting 1” to “Setting 3”, then set the corresponding
“Amp Assign” mode at menu “Manual Setup” – “Option Setup” – “Amp Assign” (vpage 28).
Connect the speakers as described at “Amp Assign” mode settings and speakers connected to the various
speaker terminals.
SBL SBR
FL
SW C FR
SL SR
7.1ch
Setting 1 :
F 7.1-channel playback
n Amp Assign mode setting and speakers connected to the various speaker
terminals
Speaker terminal
Amp Assign mode
FRONT
CENTER
SURR
SURR. BACK /
AMP ASSIGN
R L R L R L
7.1ch FR FL C SR SL SBR SBL
7.1ch
Amp Assign mode:
(Default)

Getting Started Connections Setup Playback Remote Control Amp Assign Information Troubleshooting
“Setting 2” is possible to switch the Amp Assign mode between the 5.1-channel mode and 2-channel
mode without changing the speaker connections.