Operation Manual

ENGLISH
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit
<SOURCE SELECT>
ui
<REC SELECT>
<POWER>
<SPEAKER A>
<SPEAKER B>
QUICK SELECT ENTER,op
uiop
ENTER,
[CH SELECT]
QUICK SELECT
uiop
ENTER
[Front]
[Rear]

Getting Started Connections Setup Playback Remote Control Amp Assign Information Troubleshooting
• To cancel, press <REC SELECT>, then turn <SOURCE SELECT> until
“RECOUT SOURCE” is displayed.
• Make a test recording before starting the actual recording.
• The source selected is output from the digital output connector
(OPTICAL 2).
The source selected in the REC SELECT mode is not associated with
the output from the digital output connector (OPTICAL 2).
NOTE
• Digital signals are not output from the analog REC OUT connector.
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• Input sources for which “Delete” is selected at “Source Delete”
cannot be selected.
Recording on an External Device
(REC OUT mode)
You can listen to one program source while recording a different
program source.
Other Operations and
Functions
Other Operations
Convenient Functions
1
Press <ENTER> or [CH SELECT].
Channel Volume
FL 0.0 dB SR 0.0 dB
C 0.0 dB SBR 0.0 dB
FR 0.0 dB SBL 0.0 dB
SW 0.0 dB SL 0.0 dB
Fader
FRONT : REAR
2
Use ui, <ENTER> or [CH SELECT] to select the
speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
3
Use o p to adjust the volume.
b “OFF” can be set by pressing o when the subwoofer’s volume is
set to –12 dB.
Channel Level
You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
1
Press <REC SELECT> until “RECOUT” appears on
the display.
2
Turn <SOURCE SELECT> to choose the input source
to be recorded.
The “REC” indicator and the indicator for the selected source
light.
RECOUT SOURCE RECOUT TUNER RECOUT V.AUX····
3
Play the program source.
For operating instructions, refer to the respective equipment’s
operating instructions.
To record FM or AM broadcasts, select the broadcast (vpage
41).
4
Start recording.
For operating instructions, refer to the respective equipment’s
operating instructions.