Operation Manual
Getting Started Connections Playback Remote Control Amp Assign Information Troubleshooting
ENGLISH
s ~ f Volume Control
Set the main zone volume setting.
[Display]
1 . S p 2 . I n 3 . O p
E
O p t i o n S e t u p
E
2 L i m i t O F F
E
3 P . O n L A S T
E
4 M u t e F U L L
Volume Limit
Make a setting for maximum volume.
[Selectable items]
OFF
: Do not set a maximum volume.
–20dB
: Set the maximum volume to –20 dB.
–10dB
: Set the maximum volume to –10 dB.
0dB
: Set the maximum volume to 0 dB.
Mute Level
This sets the amount of attenuation of the volume when the mute
mode is set in the main zone.
[Selectable items]
Full
: The sound is cut off entirely.
–40dB
: The sound is attenuated by 40 dB.
–20dB
: The sound is attenuated by 20 dB.
Power On Level
This sets the volume set when the main zone’s power is turned on.
[Selectable items]
Last
: Use the memorized setting from the last session.
– – –
: Always use the muting on condition when power
is turned on.
–80dB ~ +18dB
: Set the volume level when the power is turned on
in units of 1 dB.
g ~ A1 2ch Direct/Stereo Custom
Make speaker settings for 2-channel mode playback.
[Display]
1 . S p 2 . I n 3 . O p
E
O p t i o n S e t u p
E
5 2 c h C s t m O F F
E
5 2 c h C s t m O N
E
6 2 c h F L a r g e
E
7 2 c h S W Y e s
E
8 2 c h L F E N o r m
E
9 2 c h F L 3 . 6 m
E
1 0 2 c h F R 3 . 6 m
E
1 1 2 c h F r e q 8 0
Setting
To change the settings, select “ON”.
[Selectable items]
OFF
z
: To change the settings, select “ON”.
ON
: Make separate settings for 2-channel mode.
z: Use the same settings as in “Speaker Setup”.
Distance FL
Set distance from listening position to front left speaker.
[Variable range]
0.0m ~ 18.0m
Subwoofer Mode
Select low range signal to be reproduced by subwoofer.
[Selectable items]
LFE (Normal)
LFE+Main
: Select subwoofer signal.
Subwoofer
Select subwoofer use.
[Selectable items]
Yes
No
: Select subwoofer use.
Front
Select front speaker size.
[Selectable items]
Large
Small
: Select front speaker size.
Setup
Operations (vpage 21)