Operation Manual
Table Of Contents
- Getting started
- Basic version
- Connections
- Important information
- Connecting an HDMI-compatible device
- Connecting a TV
- Connecting a Blu-ray Disc player/DVD player
- Connecting a set-top box (Satellite tuner/Cable TV)
- Connecting a digital camcorder
- Connecting a control dock for iPod
- Connecting an iPod or USB memory device to the USB port
- Connecting an antenna
- Settings
- Playback (Basic operation)
- Selecting a listening mode (Surround mode)
- Connections
- Advanced version
- Information
96
Resetting the microprocessor
Perform this procedure if the display is abnormal or if operations cannot be performed.
When the microprocessor is reset, all the settings are reset to their default values.
ON/STANDBY
9
8
1
Turn off the power using ON/STANDBY.
2
Press ON/STANDBY while simultaneously pressing 8 and 9.
3
Once the display starts ashing at intervals of about 1 second, release the two
buttons.
If in step 3 the display does not flash at intervals of about 1 second, start over from step 1.
Basic version
Advanced version
InformationInformation