Operation Manual

81
Display
t ryuioQ0Q1Q2
wq e
q Decoder indicators
These light when the respective decoders are operating.
w Input signal indicators
e Information display
The input source name, surround mode, setting values and other
information are displayed here.
r Master volume indicator
t Sleep timer indicator
This lights when the sleep mode is selected (vpage45).
y MUTE indicator
This lights when the mute mode is selected (vpage19).
u Audyssey
®
indicators
Light up as follows, depending on the setting of “MultEQ
®
”
(vpage 56), “Dynamic EQ
®
” (vpage 57) and “Dynamic
Volume
®
” (vpage57).
When “MultEQ
®
”, “Dynamic EQ
®
” and “Dynamic
Volume
®
” are “ON”.
When “MultEQ
®
” and “Dynamic EQ
®
” are “ON”
and “Dynamic Volume
®
” is “OFF”.
When “MultEQ
®
” is “ON” and “Dynamic EQ
®
” and
“Dynamic Volume
®
” are “OFF”.
i Surround back indicator
This lights when audio signals are being output from the surround
back speakers (vpage61).
o Input mode indicators
Set the audio input modes for the different input sources
(vpage71).
Q0 RESTORER indicator
This lights when the RESTORER mode is selected (vpage58).
Q1 HDMI indicator
This lights when playing using HDMI connections.
Q2 Tuner reception mode indicators
These light according to the reception conditions when the input
source is set to “TUNER”.
STEREO : In the FM mode, this lights up when receiving stereo
broadcasts.
TUNED : Lights up when the broadcast is properly tuned in.
AUTO : Lights up when in the auto tuning mode.
RDS : Lights up when receiving RDS broadcasts.
Basic version
Advanced version
InformationInformation