Operation Manual
Table Of Contents
- Getting started
- Basic version
- Connections
- Important information
- Connecting an HDMI-compatible device
- Connecting a TV
- Connecting a Blu-ray Disc player/DVD player
- Connecting a set-top box (Satellite tuner/Cable TV)
- Connecting a digital camcorder
- Connecting a control dock for iPod
- Connecting an iPod or USB memory device to the USB port
- Connecting an antenna
- Settings
- Playback (Basic operation)
- Selecting a listening mode (Surround mode)
- Connections
- Advanced version
- Information
40
Connect
6.1-channel (Surround back speaker) connection
If using only one surround back speaker (with a 6.1-channel connection),
connect to the “L” side of the SURR. BACK/FRONT HEIGHT terminal.
For speaker settings in this case, see “When 6.1ch (Surround back
speaker) installed” (vpage37).
To perform 6.1-channel playback using the surround back speaker,
set “Pre Assign” to “NORMAL” in steps 3 and 4 for “Set up “Pre
Assign”” (vpage42).
Also use the “Speaker Config.” setting (vpage 61) to set
“S.Back” to “1spkr”.
NOTE
•A power amplifier (sold separately) is required for this connection.
•For speaker cable connections, see C page 6 “Connecting the
speakers”.
•For speaker impedance, see page38.
C
SB
SL
SR
IN
L
L
FL
FR
SW
Power amplifier
Basic version
Advanced version
Information
Advanced version