Quick Start Guide

8
ENGliSh DEutSch FrANçAiS itAliANo ESpAñol NEDErlANDS SVENSKA
РУССКИЙ POLSKI TÜRKÇE
8
ENGliSh DEutSch FrANçAiS itAliANo ESpAñol NEDErlANDS SVENSKA
1
Use ui to select “Crossover Freq.”,
and then press ENTER.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Front
Center
Surround
Surround Back
[ ][ENTER] Enter Return
Speaker Setup
Front
Center
Surround
Surround Back
Full Band
80Hz
80Hz
None
[ ][ENTER] Enter Return
1 Crossover Freq.
2
Use ui to select a speaker, and use
o p to select the frequency.
Front / Center / Surround / Surround Back
Specify crossover frequency for each
speaker.
•40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz /
120Hz / 150Hz / 200Hz / 250Hz : Set the
crossover frequency.
•“Crossover Freq.” can be set when the “Bass
Setting” – “SW Mode” (vpage 6) setting
is “LFE+Main”, or when you have a speaker
that is set to “Small”.
•Always set the crossover frequency to “80Hz”.
When using small speakers, however, we
recommend setting the crossover frequency to
a higher frequency.
•For speakers set to “Small”, sound below the
crossover frequency is cut from the sound
output. The cut bass sound is output from the
subwoofer or front speakers.
•The “SW Mode” setting (vpage 6)
determines which speakers can be set.
• When “LPF for LFE” is selected, speakers
set to “Small” at “Speaker Config.”
(vpage 5) can be set. If the speakers are
set to “Large”, “Full Band” is displayed and
the setting cannot be made.
• If set to “LFE+Main”, this setting can be made
regardless of the speaker size.
3
Press ENTER to enter the setting.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Front
Center
Surround
Surround Back
[ ][ENTER] Enter Return
Speaker Setup
4
Press MENU.
The menu display disappears.
Playing a Blu-ray Disc player
This section explains the basic operations for surround playback using a Blu-ray
Disc player connected to this unit.
For details, see the included CD-ROM (Owner’s manual).
Crossover Freq.
Default settings are underlined.
1
Press BD to switch an input source for a player used for
playback.
2
Play the component connected to this unit.
Make the necessary settings on the player (language setting, subtitles
setting, etc.) beforehand.
3
Adjust the sound volume.
M d/f ···························· Volume up /down
N ·····················································Muting
4
Press SURROUND 0 or SURROUND 1 to select a listening
mode.
The listening mode is displayed on the display or TV screen.
•Each time
SURROUND 0 or SURROUND 1 is pressed, the listening mode is
switched. Select the desired listening mode.
When power is switched to standby
GConnecting a Blu-ray Disc playerH
OUT
HDMI
HDMI
cable
(sold separately)
Blu-ray Disc player
Press STANDBY (X).
n Power indicator status in standby mode
•Normal standby : Off
NOTE
During power standby, a minimal amount of power is
consumed. To totally cut off the power, remove the
power cord from the power outlet.
Other operations
See the following items on the included CD-ROM (Owner’s manual).
n Playing a Blu-ray Disc player/DVD player
n Playing a portable player
n Playing an iPod
®
n Tuning in radio stations
n Convenient functions
n How to make detailed settings