Quick Start Guide

7
ENGliShDEutSchFrANçAiSitAliANoESpAñolNEDErlANDSSVENSKA
Connect Preparation Playback
РУССКИЙPOLSKITÜRKÇE
Setup
7
ENGliShDEutSchFrANçAiSitAliANoESpAñolNEDErlANDSSVENSKA
3
Use ui to select a speaker, and use
o p to select distance.
Front L / Front R / Center / Subwoofer /
Surround L / Surround R / Surround Back Lz /
Surround Back Rz
Select the speaker.
z When the “Speaker Config.” – “Surround
Back” (vpage 6) setting is set
to “None”, “Surround Back L” and
“Surround Back R” is not displayed.
•0.00m – 18.00m : Set the distance.
•The speakers that can be selected differ
depending on the “Speaker Config.”
(vpage5) settings.
•Default settings :
Front L / Front R / Center / Subwoofer : 3.6 m
Surround L / Surround R /
Surround Back L / Surround Back R : 3.0 m
•Set the difference in the distance between the
speakers to less than 6.0 m.
NOTE
Speakers set to “None” in “Speaker Config.”
(vpage5) are not displayed.
4
Press ENTER to enter the setting.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Step
Front L/R
Center
Subwoofer
Surround L/R
[ ][ENTER] Enter Return
Speaker Setup
1
Use ui to select “Channel Level”,
and then press ENTER.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Test Tone Start
Default
[ ][ENTER] Enter Return
Speaker Setup
Test Tone Start
Default
[ ][ENTER] Enter Return
1 Channel Level
2
Press ENTER.
Output test tone.
Front L
Center
Front R
Surround R
Surround L
Subwoofer
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
[ ][ENTER] Enter Return
1 Channel Level
3
Use ui to select a speaker, and use
o p to adjust the sound volume of
each speaker to be equal.
Front L / Center / Front R / Surround R /
Surround Back Rz / Surround Back Lz /
Surround L / Subwoofer
Select the speaker.
z When the “Speaker Config.” – “Surround
Back” (vpage 6) setting is set
to “None”, “Surround Back L” and
“Surround Back R” is not displayed.
•–12.0dB – +12.0dB (0.0dB) : Adjust the volume.
•When o is pressed while the subwoofer volume
is set to “–12 dB”, the “Subwoofer” setting
switches to “OFF”.
•When “Channel Level” is adjusted, the adjusted
values are set for all the surround modes. To
adjust the channel level separately for the
different surround modes, use the operation
see vm page 28 “Adjusting the volume of
the speakers“.
NOTE
•Speakers set to “None” in the “Speaker Config.”
(vpage6) settings are not displayed.
•When a headphones jack is inserted in the
PHONES jack of this unit, the “Channel Level”
is not displayed.
Default
The “Channel Level” settings are
returned to the default settings.
•Yes : Reset to the defaults.
•No : Do not reset to the defaults.
4
Press ENTER to enter the setting.
Test Tone Start
Default
[ ][ENTER] Enter Return
1 Channel Level
5
Press RETURN B.
Speaker Config.
Bass Setting
Distance
Channel Level
Crossover Freq.
Test Tone Start
Default
[ ][ENTER] Enter Return
Speaker Setup
Distance (Continued)
Default settings are underlined.
Channel Level
Default settings are underlined.