Operating instructions

To operate the tuner by remote control, switch the remote control device to "TUNER".
1
2
Use the "Auto tuning" or "Manual tuning" operation to tune
in the station to be preset in the memory
Press the MEMORY button
(m@mot@ 6©fltrO u/k)
Remote control unit:
Press the SHIFT button and select the desired memory block
(A to E).
(Remote coTltrol ul/it/
Remote control unit:
Press the PRESET UP or DOWN button to select the desired
preset channel (1 to 8).
(Remote coT_trol u_/it/
O
4½
PRESET 1t3
{2BCZ3
Dlxox
2,5
3
q MODE 213 _>
Press the MEMORY button again to store the station in the
preset memory.
(Remote coTlt rol ul/it/
To preset other channels, repeat steps 2 to 5.
A total of 40 broadcast stations can be preset -- 8 stations
(channels 1 to 8) in each of blocks A to E.
The preset broadcast stations can be checked on the on screen display
Press the ON SCREEN button repeatedly until the "Tuner Preset Stations" screen appears on the
on screen display
\
(Remote COTlt/Ol ul/it/
,q SETT,NO316 b
E3E3
[._-11€1<1
1
Tuner Preset Stations"
A1P_ 8% 50MHz
A2FM89, IOMHz
A3FM98, IOMHz
A4FMIO?. 90MHz
A5P_ 90. IOMHz
A6FM90. IOMHz
A?FM90, IOMHz
A8F_ 90, IOMHz
67