Operating instructions

[2] Multi-zone playback using the MULTI ZONE 2 terminals
The AVR-5803 is equipped with audio pre output terminals with a fixed output level (M-ZONE 2) as the MULTI ZONE 2 output terminals.
(These are not video outputs)
Settings can be made at the system setup menu so that the same source as the M-ZONE 2 pre-out terminals can be played from the speakers
connected to the M-ZONE 2 speaker terminals
• When using the PRE OUT terminals
ANOTHER ROOM
I MAIN ROOM [
7
AVR 5803
_"_RC 8001 ST
AVAMp- DEI_IO_
<_ M-ZONE2 515 _[_
• When using the M-ZONE 2 (MULTI} speaker terminals
I MAIN ROOM [
ANOTHERROOM
_"_RC AVR 5803
7--
8001ST
NOTE:
When the main unit is set to the recording output mode, the M-ZONE 2 remote control unit key cannot be operated. (See page 42.)
[3] When using a separately sold room-to-room remote control unit (RC-616, 617 or 618)
When the main room and another room are far apart and operation is not possible with RF transmission, operation is possible using a
separately sold room4o-room remote control unit (RC-616, 617 or 618).
For details, refer to the operating instructions of the RC-616, 617 or 618.
ANOTHER ROOM
INTEGRATED •
AMPLIFIER /_a
REMOTE J
CONTROL UNIT
MAIN ROOM ]
13'lrl3
AVR 5803
R6_16
4
,l_f t •
I
REMOTE
CONTROL UNIT
...........................ROOM TO ROOM REMOTE CONTROL SYSTEM
{separately sold} contro line
MULTI SOURCE AUDIO signal cable
SPEAKER came
47