Specifications

Page 2 of 3
Questions or problems, please call Denon USA Customer Support @ 800-497-8921
4. Approximant update time is 5 to 10 minutes – the length of time is dependent on the DPMS server and the
speed of the your local network environment.
5. Once updating is complete, the unit will automatically restart and the GUI will appear.
6. Remove then replace the main AC power cord. Turn on and enjoy.
To verify the updated firmware version, please check the following:
In the ASD-3N/W GUI, go to ‘Setup’, then ‘Network’, then to ‘Network Info’. Write down the IP address shown. On
any PC connected to the LAN (local network), open an Internet Browser (IE, FireFox etc) and type in the IP address
written down from the ASD-3N/W. A Status Information page will open and show the following details of a
successful update:
Firmware Date: 2007-11-21
Firmware Version: 7007
Any questions or problems, please contact the Denon USA Factory Service Department at
1-800-497-8921