AH-GC30EM_QSG_10A_190117.
Battery LED Bluetooth LED NC LED R 1. Charging Charge this unit using the included USB cable before using. The battery LED indicates the battery charge status. • Charging: Lights red • Charging completed: Lights green R It will take approx. 2 hours from empty to full charge. This unit can be used for approximately 20 hours when the battery is fully charged. When the rechargeable battery is low, a notification sounds and the battery LED blinks in red at approx. 3 second intervals.
ENGLISH 2. Pairing with Bluetooth device Pair this unit with the Bluetooth device you want to connect. 1. Activate Bluetooth function of the Bluetooth device to be connected. 2. With the power off, press and hold this unit’s 1/3 button for 4 seconds or more. After the Bluetooth LED lights, it blinks in approximately 1 second intervals and this unit enters pairing mode. 3. Select the “DENON AH-GC30” appears on the Bluetooth device to be connected.
AH-GC30EM_QSG_10A_190117.indd www.denon.com Printed in China 5411 11713 10AD Copyright © 2019 D&M Holdings Inc. All Rights Reserved.
