Owner's Manual
Table Of Contents
- Sound Bar 550
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Cannot operate the unit with Alexa
- Alexa does not respond even if called
- Resetting factory settings
- Resetting the firmware to the default state
- Quick Start Guide
- Owner’s Manual
- Wireless Speaker Home 150
- Owner’s Manual
- Contents
- Introduction
- Before your begin
- Setup
- Use
- Using your speaker
- Selecting a room/speaker
- Quick Select function
- Listening to radio
- Playing music stored on your mobile device
- Playing music from your networked PC or NAS
- Playing music from the AUX input
- Playing music from a USB memory device
- Playing music from Bluetooth device
- HEOS account
- Playing from streaming music services
- Managing inputs
- Managing your phone
- Listening to the same music in multiple rooms
- Stereo pairing
- Using the now playing queue
- Rearranging the now playing queue
- Deleting songs from the play queue
- Deleting all songs from the play queue
- Saving playlists
- Performing repeat and shuffle playback
- Using the favorite
- AirPlay function
- Making speaker adjustments
- Updating your system
- Advanced features
- Power management
- Using your speaker
- Troubleshooting
- Cannot connect the speaker to the network
- Cannot pair a Bluetooth mobile device with the speaker
- Cannot hear Bluetooth music
- Music cuts out or delays sometimes
- hear a delay when using the AUX input with my TV
- Connecting to a network using an iOS device
- I hear distortion when using the AUX input
- Connecting to a WPS network
- Resetting your speaker
- Buttons do not operate correctly
- Status LED table
- Appendix
- Quick Start Guide
- Owner’s Manual
- Wireless Home Subwoofer
Power does not turn on / Power is turned off
Power does not turn on.
0
Check whether the power plug is correctly inserted into the power outlet. (v p. 26)
0
If the power of this unit cannot be turned on with the remote control for the TV, press the c button to turn on the power of this unit. (v p. 27)
0
Enable the TV’s HDMI control function when using an HDMI cable to connect this unit to your HDMI control-compatible TV. (See the TV owner’s manual
for details.)
Power automatically turns off.
0
If no operations have been performed for 20 minutes or more and audio is not being input, this unit automatically switches to quick start mode.
Turn this unit’s power on again. (v p. 72)
Operations cannot be performed through the remote control unit
Operations cannot be performed through the remote control unit.
0
Battery is worn out. Replace with new battery. (v p. 11)
0
Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 30°. (v p. 12)
0
Remove any obstacle between this unit and the remote control unit.
0
The coin-shaped lithium battery (CR2025) is not positioned correctly. Correct the positioning so that the f symbol engraved on the battery faces
upwards. (v p. 11)
0
This unit’s remote control sensor is exposed to strong light (direct sunlight, inverter type fluorescent bulb light, etc.). Move this unit to a place in which
the remote control sensor will not be exposed to strong light.
Contents
Connections Playback Settings Tips Appendix
62