Owner's Manual
Table Of Contents
- Sound Bar 550
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Cannot operate the unit with Alexa
- Alexa does not respond even if called
- Resetting factory settings
- Resetting the firmware to the default state
- Quick Start Guide
- Owner’s Manual
- Wireless Speaker Home 150
- Owner’s Manual
- Contents
- Introduction
- Before your begin
- Setup
- Use
- Using your speaker
- Selecting a room/speaker
- Quick Select function
- Listening to radio
- Playing music stored on your mobile device
- Playing music from your networked PC or NAS
- Playing music from the AUX input
- Playing music from a USB memory device
- Playing music from Bluetooth device
- HEOS account
- Playing from streaming music services
- Managing inputs
- Managing your phone
- Listening to the same music in multiple rooms
- Stereo pairing
- Using the now playing queue
- Rearranging the now playing queue
- Deleting songs from the play queue
- Deleting all songs from the play queue
- Saving playlists
- Performing repeat and shuffle playback
- Using the favorite
- AirPlay function
- Making speaker adjustments
- Updating your system
- Advanced features
- Power management
- Using your speaker
- Troubleshooting
- Cannot connect the speaker to the network
- Cannot pair a Bluetooth mobile device with the speaker
- Cannot hear Bluetooth music
- Music cuts out or delays sometimes
- hear a delay when using the AUX input with my TV
- Connecting to a network using an iOS device
- I hear distortion when using the AUX input
- Connecting to a WPS network
- Resetting your speaker
- Buttons do not operate correctly
- Status LED table
- Appendix
- Quick Start Guide
- Owner’s Manual
- Wireless Home Subwoofer
Operating this unit using the remote
control of a TV
There are three ways to operate this unit using the remote control of a TV.
0
HDMI control function
Connect this unit to a TV that supports the HDMI control function with
an HDMI cable and enable the HDMI control setting on the TV to
perform basic operations on this unit (changing the input source, turning
the power on and off, adjusting the volume) with the remote control of
the TV.
Refer to “HDMI control function” for more information about the HDMI
control function. (v p. 71)
0
Remote control preset function
This unit is preset such that you can adjust the volume using the volume
adjustment button on the remote controls for the televisions of major
manufacturers. This is useful when the television you are using does
not support HDMI control, or when you connect to a television that does
not have an HDMI connector.
0
Remote control learning function
If your TV does not support the HDMI control function and Remote
control preset function, use this unit’s remote control learning function.
This enables you to operate this unit with the remote control of a TV.
(“Using the remote control learning function” (v p. 57))
o
Using the remote control learning function
Perform this operation on the HEOS App. Download the HEOS App in
advance to your iOS or Android device. (v p. 31)
1
Tap the Settings icon a located in the upper left
corner of the main “Music” menu.
The setting menu screen is displayed.
2
Select “My Devices” to display a list of your HEOS
built-in devices.
3
Select this unit.
4
Select “Remote Control”.
The setup below is not required when device control by HDMI is
active. (A check mark will be displayed by “HDMI CEC” in this case)
5
Select “IR Control”.
6
Select a command of this unit you would like to control
by the remote control of your TV.
Follow the instructions on the screen to complete setup.
Contents
Connections Playback Settings Tips Appendix
57