Owner's Manual
Table Of Contents
- Sound Bar 550
- Owner’s Manual
- Contents
- What you can do with this unit
- Accessories
- Part names and functions
- Positioning
- Troubleshooting
- Power does not turn on / Power is turned off
- Operations cannot be performed through the remote control unit
- Trouble teaching this unit remote control commands
- No sound comes out
- Music cuts out or delays sometimes
- The HDMI Control function does not work
- Audio can be heard coming from the TV’s speakers
- I hear a delay when using the external input with my TV
- Bluetooth playback does not work
- Cannot connect the sound bar to the network
- Connecting to a network using an iOS device
- Connecting to a WPS network
- This unit takes long time to turn on
- Cannot operate the unit with Alexa
- Alexa does not respond even if called
- Resetting factory settings
- Resetting the firmware to the default state
- Quick Start Guide
- Owner’s Manual
- Wireless Speaker Home 150
- Owner’s Manual
- Contents
- Introduction
- Before your begin
- Setup
- Use
- Using your speaker
- Selecting a room/speaker
- Quick Select function
- Listening to radio
- Playing music stored on your mobile device
- Playing music from your networked PC or NAS
- Playing music from the AUX input
- Playing music from a USB memory device
- Playing music from Bluetooth device
- HEOS account
- Playing from streaming music services
- Managing inputs
- Managing your phone
- Listening to the same music in multiple rooms
- Stereo pairing
- Using the now playing queue
- Rearranging the now playing queue
- Deleting songs from the play queue
- Deleting all songs from the play queue
- Saving playlists
- Performing repeat and shuffle playback
- Using the favorite
- AirPlay function
- Making speaker adjustments
- Updating your system
- Advanced features
- Power management
- Using your speaker
- Troubleshooting
- Cannot connect the speaker to the network
- Cannot pair a Bluetooth mobile device with the speaker
- Cannot hear Bluetooth music
- Music cuts out or delays sometimes
- hear a delay when using the AUX input with my TV
- Connecting to a network using an iOS device
- I hear distortion when using the AUX input
- Connecting to a WPS network
- Resetting your speaker
- Buttons do not operate correctly
- Status LED table
- Appendix
- Quick Start Guide
- Owner’s Manual
- Wireless Home Subwoofer
Before using the remote control unit
The remote control unit has a built-in lithium battery.
Pull out the insulation sheet before use.
.
o
Replacing the battery
1. Lightly slide the catch of the battery case on the back of the remote
control in the rightward direction.
.
2. While pushing the catch lightly to the right, pull out the battery case.
.
3. Remove the old battery, then insert a new coin-shaped lithium
battery (CR2025) into the battery compartment so that the + symbol
engraved on the battery faces upwards.
4. Replace the battery case in the original position.
.
CR2025
NOTE
0
If the battery should have a leakage, immediately replace and dispose of the
battery. In this case, there is a risk of burn when the liquid comes in contact with
skins or clothes, so a great care should be taken. If the liquid accidentally comes in
contact, wash with tap water and consult a doctor.
0
Remove the battery from the remote control unit if it will not be in use for long
periods.
Contents Connections Playback Settings Tips Appendix
11