- Dethmers Manufacturing Company Automobile Accessories User Manual

Page 20
KKLB Aluminator
TM
Light Bar (complete)
REF. PART
NO. NO. QTY. DESCRIPTION
LIGHT BAR PARTS LIST
Please order replacement parts by PART NO. and DESCRIPTION.
1. 01772 2 Nylon Security Strap with hooks & tightener
2. 01857 1 Left Tail/ Brake and Signal Light w/Lenses
3. 01773 1 Brown Jumper Wire
4. 01886 4 Wire Holder (metal)
5. 02385 1 Light Bar Framework
6. 02386 2 Adjustable Light Bracket
7. 01856 1 Right Tail/ Brake and Signal Light w/Lenses
8. 02772 10 1/4”-20UNC Nylon Insert Locknut
9. 00092 6 1/4”-20UNC x 1/2” Hex Head Bolt
10. 01777 2 Light Bar “Z” Bracket
11. 01778 4 3” Suction Cup w/Bolt (#13)
12. 02198 1 Light Bar Wiring Harness (new style)
13. 00068 4 1/4”-20UNC x 3/4” Hex Head Bolt
14. 01911 - Large Red Lens
15. 01912 - Small Red Lens
16. 01890 - Clear Lens
OPTIONAL LIGHT BAR (KKLB) PARTS BREAKDOWN
TESTING LIGHTS BEFORE USE
1. With headlights in “ON” position, the tail lights and the
clearance lights should be lighted.
2. Start engine and have someone depress brake pedal.
Brake lights of the light bar and towing vehicle should
come “on” and “off” simultaneously with each applica-
tion.
3. Turn left turn signal on. Left turn light of light bar and tow-
ing vehicle should fl ash simultaneously. Should the turn
signal lights of the light bar function opposite to those of
the towing vehicle, it is probable that the YELLOW and
GREEN wires have been reversed. Check the plug con-
nections to make sure wire colors are not crossed at any
point. If plug connection is incorrect, correct problem by
reversing yellow and green wire connection on the towing
vehicle.
1
1
2
1
1
6
7
8
8
8
9
9
9
8
12
13
13
11
11
8
16
15
14
9
8
4
4
3
5
COLOR CODE FOR WIRING HARNESS
WHITE Ground
BROWN Tail Lights, License Plate Lights,
Light Cluster Bar & Clearance Lights
YELLOW Left Turn and Stop
GREEN Right Turn and Stop
10
NOTE: The wires to the optional light
bar should be run along the car and
fastened so as not to damage the
fi nish of the towed vehicle.