Specifications

Page 12
eZ-Latch Coupler Operation
2" & 2 5/16" Couplers
(4) 5/8" Grade 5 Bolts are required with
channel mounted 2" & 2 5/16" couplers
(1) eZ-Latch couplers do not require users to lift the handle for the coupler to engage the ball. Position the ball
in the center of the ball socket or slightly forward, then begin to lower the coupler with the jack on the trailer.
(2) At the mid-way point when lowering the trailer, the stem on the handle will begin to ri
se up allowing the
ball to enter the ball socket.
(3) Once the ball has fully engaged the socket the ball keeper will snap back into place securing the coupler
to the ball.
All Demco eZ-Latch couplers are tested and rated without the use of a safety pin and are not required for
the couplers to be used in safe operation. A security hole is available on all the eZ-Latch couplers to be
used in correlation
with a lock for theft deterrence.
For more information visit www.demco-products.com
BC20020 REV 0