Specifications

Page 10
Please order replacement parts by PART NO. and
DESCRIPTION and COLOR.
Note: -?? = -95 Plated -97 Primed Red -81 Black
-52 Metallic Silver
The weight rating of the coupler is dependent on the correct bolts being used. You must use the
exact size, grade and number of bolts as specified in your manual. Mounting hardware can be ob-
tained from a supplier or Demco.
WARNING: TO AVOID PERSONAL INJURY OR PROPERTY
DAMAGE, OBSERVE THE FOLLOWING INSTRUCTIONS:
WELDING
Tack Actuator down on the
four corners then weld in a
criss cross pattern using
2” to 2-1/2” welds with 2”
spaces between welds
(when welding down to a
flat area of the tongue)
Do not weld in the
circled area
Do not weld in the
circled area
Keep braces and welds
back to allow access to
shock pin holes
Keep braces
and welds back
to allow access
to shock pin
hole
Use gussets to support the
back of the actuator if welding
in position shown
Keep gussets on
rear of actuator
to lower half to
avoid circled
area
Weld as shown
NOTE: disassembly of the actuator before welding is recommended
1
2
3
4
5
6
7
8
REF.
NO. PART NO. QTY. DESCRIPTION
37. 11101-?? 1 Outer Case w/ no mounts
38. 13533-?? 1 Outer Case w/ 3 hole flush mount
39. 11163-?? 1 Outer Case w/ 50 ° mount
40. 11168-?? 1 Outer Case w/ 3 hole mount
41. 11170-?? 1 Outer Case w/ universal holes
42. 11169-?? 1 Outer Case w/ 2 hole mount
43. 02587 2 5/8”-11UNCNylonInsertLockNut
44. 02434 2 5/8”-11UNCx41/2”HexHeadBolt(Gr.5)
45. 11076-?? 1 Channel Down Slider
46. 11077-?? 1 ChannelUpSlider
47. 09557-?? 1 Pintle Ring (10 Ton Capacity)
48. 05593-?? 1 Clevis
49. 07678-?? 1 2-5/16” Lever Lock Bolt-On Coupler
50. 12113-?? 1 2” Lever Lock Coupler
51. 11070-?? 1 2-5/16” Bulldog Coupler Welded to Straight Slider Tube
- 11071-?? 1 2” Bulldog Coupler Welded to Straight Slider Tube
52. 11069-?? 1 2-5/16” Bulldog Coupler Welded to Drop Slider Tube
- 11072-?? 1 2” Bulldog Coupler Welded to Drop Slider Tube
53. 05557-?? 1 2-5/16” Bulldog Coupler Welded to Clevis Channel
- 05823-?? 1 2” Bulldog Coupler Welded to Clevis Channel
54. 04051  4 5/8”-11UNCx1-1/2”HexHeadBolt(Gr.5)
55. 11075-?? 1 Channel Centered Slider
56. 03730 4 5/8” Stover Locknut
57. 11081-?? 1 Slider w/ Flat Plate Mount
58. 11073-?? 1 Straight Slider w/ 2” Coupler
59. 11074-?? 1 Drop Tube Slider w/ 2-5/16” Coupler
60. 12141-?? 1 2-5/16” Lever Lock Coupler Flat Mount
61. 12688-?? 1 2” Lever Lock Bolt-On Coupler
62. 11292-?? 1 Channel Center Slider
63. 12808-?? 1 Channel Down Slider
64. 14040-?? 1 2 5/16” eZ-Latch Cast Bolt On Coupler
65. 14976-?? 1 2” eZ-Latch Bolt On Coupler
66. 15080-?? 1 2” eZ-Latch Flat Mount Coupler
OUTER CASE OPTIONS AND AVAILABLE HITCH CONFIGURATIONS PARTS BREAKDOWN