User's Manual

211 338 44.indd / 081019

This parameter makes it possible to reverse the direction of movement of the up-

per mini joystick for the lifting/lowering motion.

The default setting is 0, i.e. the mini joystick must be pulled towards the operator

for lifting.

The current setting is shown on the screen. Use the following buttons to navigate:

Button Function

→ Change to display of parameter 508

← Change to display of parameter 506

↑ Exit parameter programming menu

F1 Change to entry and selection mode

When the system has been switched to entry and selection mode, the lifting/

lowering direction of motion of the upper joystick can be reversed:

Selection Meaning

Parameter 0 Lift = mini joystick must be pulled towards the operator (default)

Parameter 1 Lift = mini joystick must be pushed up and away from the operator.

Use the following joysticks/buttons to select and navigate:

Button Function

→ Display the next possible value

← Display the previous possible value

↑ Exit parameter programming menu

F2 Accept the displayed setting

P1.3.1 Display mode

P1.3.2 Entry and selection mode

P1.3 Displaying and

entering reversal

of the direction of

the lifting/lowering

motion, parameter

code 507