User's Manual

51
211 338 44.indd / 081019
The following data can be displayed via the Information menu:
Code Information
401 Remaining duration of service in % (determined from load
spectrum), not available for DR-Com rope hoists.
400 Operating hours
000 Basic value for full load hours (with reference to rated load for size)
001 Gearbox transmission ratio
002 Drum diameter in mm
003 Reeving factor
004 Control type (crab or crane control)
005 Solo crab (with/without crane control)
146 Customer number
147 Order number
148 Serial number
149 Year of manufacture
150 Lifting speed V1 in m/min
151 Lifting speed V2 in m/min
152 Lifting height in m
153 Reeving
155 Rope diameter in mm
171 Country code
216 Control system serial number
217 Hardware version
520 Software version of main controller
529 Software version of monitoring controller
550 Serial number of ZMR module (as of V3.40)
551 Hardware version of ZMR module (as of V3.40)
The following additional information is available with the “Status analysis” option:
Code Information
402 K1 switching operations
403 Hoist brake switching operations
404 Travel path in m
405 K2 switching operations
406 K3 switching operations
416 Number of times slip limit is exceeded
417 Number of times maximum speed is exceeded
418 Number of hoist brake errors
419 Number of times overspeed brake is tripped
420 Number of overloads
421 Number of times emergency stop is actuated during motion of at
least one axis
422 Hoist unit elapsed operating time counter (as of V3.40)
423 Travel axis elapsed operating time counter (as of V3.40)
448 Last error
449 Penultimate error
The order and quantity of information depend on the software and can change.
9.6 Information menu data
K564
14.6%
401:
42660844.eps
Example:
Display for remaining service
life