User's Manual

40
211 338 44.indd / 081019
If one of the paired radio transmitters is lost or has to be replaced, individual
radio transmitters can be deleted from the DRC radio receiver’s list of pre-paired
transmitters.
Call up the DRC radio receiver’s parameter menu as follows:
– Hold the STOP button down.
– Push the LOWER joystick.
– Push the RIGHT joystick twice.
– Hold the LOWER joystick down until the screen changes.
– Release the STOP button.
– Select the parameter with the LEFT joystick.
Parameter 013 = DRC-DR
Parameter 113 = DRC-MP
1256347
013=
K564
#
0000000
013=
K564
013:
K564
7.9.4 Logging-off individual radio
transmitters
43605044.eps
43605144.eps
43605244.eps
1256347
013=
K564
43604944.eps
– Press the F1 key to obtain the serial no. of the first radio transmitter (1256347
shown in the example).
– Select the required radio transmitter with the RIGHT or LEFT joystick.
The number 0000000 is displayed for free memory slots to which radio
transmitters can still be assigned.
– Press the F1 key to mark the radio transmitter. You can also mark two radio
transmitters. Press the F1 key again to remove a marker.
– Press the F2 key to delete the marked radio transmitter.
– Push the LIFT joystick to return to the main menu.