User's Manual

37
211 338 44.indd / 081019
K564
???
K564
STOP
You can now take over control of the DRC radio receiver.
– Press the HORN pushbutton to confirm that the new radio transmitter has
taken over control. The radio transmitter is actively connected to the DRC radio
receiver.
4. The procedure must be repeated if a further radio transmitter needs to be
logged on.
If the log-on timer period has not elapsed, you can switch the current radio
transmitter off and pre-assign the next radio transmitter (see item 2), or you can
re-start the log-on timer with the currently logged-on radio transmitter (see item
1).
The currently logged-on radio transmitter cannot surrender control until it is either
completely switched off or on Standby.
K564:1
01
????
???
The digit after the crane ID indicates the number of radio transmitters that are
pre-paired with the DRC radio receiver.
– Press the F2 key to confirm the required DRC radio receiver.
After a few seconds, the screen shows:
– Select the DRC radio receiver with the RIGHT or LEFT joystick.
43604044.eps
43604144.eps
42695644.eps
7.9.2 Transfer to other pre-assigned
radio transmitters
Another pre-paired radio transmitter can now be actively logged onto the DRC
radio receiver.
– Press the STOP button if the current radio transmitter is on Standby or switched
off.
The transfer icon
will appear on the screen within approx. 3 seconds:
K564
STOP
43604144.eps