User's Manual

211 338 44.indd / 081019

– Quit the parameter menu with the LIFT joystick.

The screen shows:

K564

STOP

2. To log on a further radio transmitter, the previously logged-on radio transmitter

must be switched off or changed to Standby mode

– Hold the STOP button down and push the LOWER joystick 6 times to switch the

radio transmitter off

– Hold the STOP button down and push the LOWER joystick 3 times to put the

radio transmitter into Standby mode.

– Switch the next radio transmitter on.

The screen shows, for example:

????

STOP

???

3. Log on the next radio transmitter in a similar way as for the first transmitter:

Radio transmitter is in STOP mode

– Hold the STOP button down.

– Press the F1 key 3 times.

– Hold the F2 key down for approx. 5 seconds until the screen changes.

– Release the STOP button.

The radio transmitter will now search for a DRC radio receiver that has a run-

ning pre-log-on timer. When a corresponding DRC radio receiver is found, the

screen shows:

????

???

43603844.eps

43603744.eps

43603944.eps