User's Manual

34
211 338 44.indd / 081019
????
STOP
???
43603844.eps
– Press the F2 key to confirm selection of “????”.
Release of the receiver is initiated. The receiver outputs a short horn signal to
indicate the successful log-off or release of the receiver.
The screen shows the following:
NOTE
Wait until you hear a horn signal. The system will fail to enable if the menu is
quit before the horn signal sounds.
i
If the radio transmitter that was originally logged onto the crane is defective or
has been lost, the radio receiver can be enabled using another DRC D3 radio
transmitter by means of the crane ID or serial no. See section 7.9.1
Select
Select crane/crab via LEFT
and RIGHT
43679544.eps