User's Manual

211 338 44.indd / 081019

43679144.eps43678944.eps 43679044.eps

43678844.eps

Red

Press

1 x

Red

Hold down

Transmitter is in STOP mode

1. Hold the STOP button down during the log-on process.

2. Transmitter is in STOP mode

3. Press the F2 key 3 times.

4. Hold the F1 key down for approx. 5 seconds until

the screen changes.

5. Following activation, a two-digit number is shown in the 1st main row which

indicates the number of free radio receivers that can be controlled and are

within range (the example shows 01 available receivers).

6. Release the STOP button

Select radio receiver based on crane ID

7.6.2 Activating log-on:

NOTE

A DRC-MJ D3 hand-held transmitter only needs to be logged onto to a DRC

radio receiver with code NOID when the unit is put into operation for the first

time in order, subsequently, to assign the crane ID specified in section 7.6.3 to

the DRC radio receiver.

If there are several new DRC radio receivers that have NOID, the code after the

colon can be used to identify the corresponding DRC radio receiver.

Definition:

M: DRC-MP

D: DRC-DR

The two digits after the letter are the last digits of the DRC radio receiver serial no.

Press

3 x

Hold down

for approx.

5 seconds