User's Manual

20
211 338 44.indd / 081019
Crane ID K564
The crane ID shows the crane to which the DRC-MJ D3 hand-held transmitter has
been assigned. The crane ID is saved in the DRC radio receiver and can only be
entered via the DRC-MJ D3 hand-held transmitter.
Display of selected crab(s)
The screen to show the selected crabs is only active if there are two crabs and
both can be operated with one radio control system.
Symbol Meaning
I Crab 1 is selected
II Crab 2 is selected
I+II Crabs 1 and 2 are selected
6.4.2.1 General display
Symbol Meaning
Full signal strength
50% of the maximum range between DRC-MJ D3 hand-held
transmitter and DRC radio receiver reached
Weak signal: if the distance between the DRC-MJ D3 hand-held
transmitter and the DRC radio receiver increases any further, the
radio signal could be interrupted
Signal strength icon
43667044.eps
Display of radio signal strength