User's Manual

211 338 44.indd / 081019

5 Transport, packing, storage

5.1 Transport inspection

5.2 Packing

5.3 Storage

• Check that the delivery is complete and check it for any transport damage

immediately on receipt.

• If any transport damage is visible from the outside, only accept the delivery on

condition. Note the scope of damage in the shipping documents/delivery note of

the forwarding company and lodge a claim.

• Lodge a claim for any defects that are not immediately detected as soon as

they are discovered, since claims for damages may only be asserted within the

relevant claim notification periods.

If no agreement has been made on the return of the packing material, separate the

materials according to type and size and make them available for further use or

recycling.

Environmental protection:

• Always dispose of packing materials in an environmentally compatible way and

according to locally applicable disposal regulations.

• If required, utilise the services of a recycling company.

Until they are installed, DRC radio controls and their accessories must be kept

closed and may only be stored under the following conditions:

• Do not store outdoors.

• Store in dry and dust-free places, relative air humidity: max. 80%.

• Do not expose to aggressive media.

• Protect against direct sunlight.

• Avoid mechanical vibrations.

• Storage temperature: -25 to +55 °C.

• Avoid strong temperature fluctuations (condensation).

• Check the general condition of all parts of the packing at regular intervals. If

required, refresh or renew rust protection.

• If stored in a damp location, the DRC radio control system must be packed tight

and protected against corrosion (use desiccant).