Instruction Manual

I-1384 Page 6 of 16
Rev. -- 47069 8/23/2021
Programming
Programming Menu
1. To ENTER the programming menu, hold the right arrow for 4 seconds until the
Language menu appears.
2. Press ENTER to select a different language. A cursor will appear next the displayed
language.
3. Use the UP and DOWN to select a different language. English, French, Spanish and
Portuguese are the 4 choices.
4. Press ENTER when the desired language is displayed.
5. Press the DOWN to access programming and the Enter Code screen will be displayed.
6. Press ENTER.
a. If it is a brand new unit or has never had an access code programmed the system
will go immediately into programming.
b. If the system has been programmed previously with an access code, the system
will display 4 zeros. The appropriate access code will need to be entered by
using the LEFT and RIGTH and UP and DOWN. When the correct access code
is displayed, press ENTER.
Clear Load Counts
1. Use the UP and DOWN to scroll through the programming menu until you find Clear
Load Counts.
2. Press the ENTER to access the menu.
3. Press ENTER to clear all load counts and then press the LEFT arrow to confirm the
clearing of all load counts.
4. Press the LEFT to move back to the Programming Menu.
Language
English
Enter Code
Clear Loads
Operation Mode
Configuration
Formula Lockout
Clear Load
Counts
Left to Reset