User manual

ManualsBrandsDELVCAM ManualsComputer equipmentDELV-HD7

DELV-HD7

HDMI-VGA-VIDEO MONITOR

With Dual Composite Video/Audio

USER MANUAL

Thank you for purchasing the DELVCAM HD-7 High Definition liquid crystal display monitor. This

product employs new integrate circuits and high quality TFT LCD modules. It operates with low power

consumption, emits no radiation, and is a compact form factor. The color TFTLCD is the most suitable

display for VGA,VCD, DVD and GPS system for motorcars and ships. It also can be used in the high

end media facilities for in-line monitoring of HDMI, VGA and Composite Video signals. This product is

manufactured to the highest standards and will operate well in all applications where performance is

demanded but for a cost effective price.

Summary of content (12 pages)

PAGE 1
DELV-HD7 HDMI-VGA-VIDEO MONITOR With Dual Composite Video/Audio USER MANUAL Thank you for purchasing the DELVCAM HD-7 High Definition liquid crystal display monitor. This product employs new integrate circuits and high quality TFT LCD modules. It operates with low power consumption, emits no radiation, and is a compact form factor. The color TFTLCD is the most suitable display for VGA,VCD, DVD and GPS system for motorcars and ships.
PAGE 2
CONTENTS --------------------3 1. PRODUCT DESCRIPTION  DESCRIPTION OF MONITOR FUNCIONS --------------------3  REMOTE CONTROLLER --------------------4  MEDIA BREAKOUT CABLE --------------------5 2.
PAGE 3
DESCRIPTION OF MONITOR FUNCTIONS Picture 1（A） 1. Indicator light 2. : Power on/off 3. ：(VGA), AV switch. 4. ：Volume down or to adjust the value of setting function 5. Infrared receiving window 6. 7. ：Volume up or to adjust the value of setting function ：To activate OSD menu. 8. ：Selection key, to adjust phase directly. 9. ：Selection key, to adjust the brightness directly. 10. DC12V input jack( used when Media Breakout Cable is not used) 11. HDMI input jack 12.
PAGE 4
REMOTE CONTROL OPERATION 1. ：Power on/off 2. : MUTE 3. : To activate OSD menu. 4. : Volume down or to adjust the value of setting function 5. : Volume up or to adjust the value of setting function 6. : Selection key, to adjust the brightness directly. 7. : Selection key, to adjust phase directly. 8. : Aspect ratio switch,4：3/16:9 9. ：UP/ DOWN Switch 10. ：Right/Left Switch 11.
PAGE 5
MULTIMEDIA BREAKOUT CABLE: used to interface VGA/Composite Video/Audio 1. input end: connect to matching jack on monitor 2. 9-pin plug for VGA adapter(below) 3. Power jack 12 VDC input: This power input is the same as the chassis mounted power jack 4. RCA jack for composite video 1 input 5. RCA jack for audio input 6. RCA jack for composite video 2 input VGA INTERFACE CABLE: This cable is used for VGA signal interface. The USB end is not used with this monitor. 1.
PAGE 6
Manual operation After connecting power, the unit will be in standby state（red light）- Press ” ” on the unit or on the remote controller, the buttons of the unit will blue light, at that time the unit begins to work. Press the same button again the unit will return to its standby state (Note the blue button will black out in 5 or 6 seconds soon after you turn off unit.). Push “PC(VGA)/AV” on the unit or on the remote controller to switch between AV and (PC)(VGA).
PAGE 7
Description of OSD： In (VGA) mode：（Color）： After enter into “Color” item of OSD, use “ ”/“ ”to select and then push“ ”/“ ”to adjust. ※Brightness: To adjust the brightness. ※Contrast: To adjust the contrast of image. ※ Color Temp：To adjust the contrast of Color Temp. Color temperature of OSD is adjustable. Press “”on the unit or on the remote controller to select “Color Temp”, then you can choose to set color temperature such as: 6500 Ks, 7500 Ks or 9300 Ks by pressing“ ”/“ ” .
PAGE 8
Note: when you select the “USER” item a mini box will appear in the right bottom corner of the OSD. As pictured below. （Adjust）： ※ Auto Config：To adjust automatically .If the auto-adjust is not satisfy your request, you can adjust manually. ※ H Position：To adjust the picture in horizontal. ※ V Position：To adjust the picture in vertical. ※ Phase：To adjust the phase. ※ Clock：To adjust the clock, make field and line synchronization.
PAGE 9
（Function）： ※ Reset：Back to original setting. ※ Display Ratio：To change the display ratio,16:9/4:3. ※ LR Rotation：To change the picture left/right. ※ UD Rotation：To change the picture up/ down. （Sound）： ※ Volume: To adjust the volume.
PAGE 10
In AV mode：（Color）： ※Brightness: To adjust the brightness. ※Contrast: To adjust the contrast. ※Hue: To adjust the hue adjust in NTSC mode. ※Saturation: To adjust the saturation. （OSD）： ※ Language：2 languages for OSD as below： English 简体中文 ※ H Position： To adjust the OSD position in horizontal. ※ V Position：To adjust the OSD position in vertical. ※ OSD Timeout：To adjust the clock. ※ Transparent：To adjust the level of transparency.
PAGE 11
（Function）： ※ Reset：Back to original setting. ※ Display Ratio：To change the display ratio,16:9/4:3. ※ LR Rotation：To change the picture left/right. ※ UD Rotation：To change the picture up/ down. （Sound）： ※ Volume: To adjust the volume.
PAGE 12
SAFETY PRECAUTIONS 1. To prevent fire or shock hazard, do not expose this equipment to an environment of high humidity and/or dust. Do not use in an unprotected outdoor installation or any area classified as overly damp or wet. 2. The temperature for installation should be kept between 0°C ~ 60°C. Avoid direct sunlight exposure or extreme changes of temperature over a short period of time. 3. Do not disassemble the unit or put it on an unstable base 4. Do not drop it and avoid heavy impact. 5.