User Manual

7
3. Software application
1. Cross-connection network cable
Note：W: white, G: green, O: orange, Bl: blue, Br: brown
2. Software settings
①. Connect the LAN port with PC.
②. Set the PC IP to 192.168.1.XXX network segment(XXX is a
user-definable parameter).
③. Open the application program,
then select the monitor which is
needed to be adjusted
(Monitor1or Monitor2).
④. Set the parameter values
according to user's individual
requirements.
First, click the "read" button to
read the corresponding
parameter value of the device to
the software, secondly, modify
the parameter value on the
software, then, the instruction
can be realized on the device.