Specifications

20
The following are some
of the more common wear
parts which will need to be
removed and replaced in
your 26/26D style Stitcher
Head. Some common
replacement parts do not
require the Stitcher Head to
be removed from the stitcher
machine. These parts will
be addressed first, then a
more specific explanation
for disassembling and
replacing wear parts for the
26/26D Stitcher Head will
follow.
Removing and Replacing
the Wire Cutters
Figure 15
The Wire Cutters (9048)
have four cutting surfaces,
each of which may be used
by reversing the ends and
positioning in the Face
Plate (2132BA or 2146CA).
Worn Cutters can cause
poor stitch quality. To
change or reverse the Wire
In time, you will need to replace some parts in your 26/26D style Stitcher Head. When this happens,
first locate the needed part in one of the following diagrams. Then locate the DeLuxe/Bostitch part
number and contact your Graphic Arts Representative to order the part by the part number, description
and quantity.
Ordering Spare Parts
Always power down the stitcher machine
before any maintenance or adjustments
are made to the stitcher head.
!
CAUTION
!
Replacing Spare Parts (Figure 14)
Figure 14 - Replacing Spare Parts
9115
9023
9024
9050
9049
9009-25 or
9009-21X25
2132BA or
2146CA
UA2305.2 (3)
9113
9112
9051
9056 (3)
9015
9171
0084
2601B
9098
9048 (2)
9022
9014
9029
9026A