Specifications

2601AHD, 2601DHD and 2601EHD
(Slot Mount/Rail Drive)
To remove the 2601AHD Series, the 2601DHD
Series and the 2601EHD Series Heads, raise
the clamping Eccentric Handle (9003A) until
the Bonnet Clamp Block (9002) disengages
(approximately an 11 o’clock position). The head
can then be removed from the stitcher. Refer to
Figure 2.
When attaching the 2601AHD Series, the
2601DHD Series and the 2601EHD Series Heads to
the stitching machine, check to see that the Driving
Slide Lug (2602) and the Face Plate Adjustment
Slide (2610) are engaged in the grooves of the
stitching machine’s Driving and Adjusting Rails.
Lock the Bonnet (2601R) in position by pressing
down on the clamping Eccentric Handle.
10
The quality and quantity of work that can be produced by the DeLuxe Stitcher Company Heads is
dependent upon the operator making the various operating adjustments as accurately as possible. The
following illustrated instructions are provided so that the operator will clearly understand how to make
the various required operating adjustments.
2001DHD and 2301DHD
(Bolt Mount/Crank Drive)
To remove the 2001DHD or the 2301DHD Series stitcher heads from No. 2 and No. 23 style Stitching
Machines, rotate the Drive Pulley on the stitcher machine until the Grip (9015) on the 2001DHD
or 2301DHD style head closes on the wire. Remove the Bonnet Binder Stud Nut (HN1213) and
withdraw the head from the machine. Refer to Figure 3.
NOTE: Instructions may vary with other types of Bolt Mount / Crank Drive machines.
To attach the head, rotate the Drive Pulley on No. 2 and No. 23 style Stitcher Machines manually
until the stitcher’s Driving Crank is at the top of its stroke. Engage the Driving Shaft Connecting Link
Figure 2 - Removing and Attaching Heads
Mounting
9003A
9002
2601R
(BONNET)
2610
2602
* Parts shown in out-
line are separated for
identification purposes
only.
2623