Specifications

50
Optional Equipment
In addition to the standard features offered with the G8 Stitcher Head, optional equipment items can
be purchased to better accommodate your stitching needs. The following kits can be purchased from
your Graphic Arts Representative.
The G8 Crank Drive Kit is available to owners of all styles of rail-driven G8 Heads who need to
convert, for whatever reason, their existing G8 head to a crank-driven model. Included in this Kit are
the Rear Clamp Pin, Rear Mounting Bolt, Bonnet Stud Nut, the Crank Drive Link and a complete
assembly of the Link-Driven Driving Slide.
For more information about purchasing the G8KC or for technical support when making the
conversion from rail-driven to crank-driven, contact your local Graphic Arts Representative.
G8KC
The standard G8 Head with 24 gauge wire can be converted to a Loop style by exchanging the
following three sub-assemblies: the Wire Holder Assembly, the Cutter Block Assembly and the
Bender Bar Assembly. Refer back to pages 23 through 28 for complete disassembly and reassembly
instructions.
Contact your DeLuxe Stitcher Graphic Arts Representative or the DeLuxe Stitcher Customer
Service Department for ordering information or for additional technical information on other wire
sizes
G8KL (Figure 24)
To avoid risk of personal injury never loosen clamp
handle unless load on stand is supported.
rWARNING
!
G20317AA
G20301A
G20300AA
Figure 24 - Loop Stitch Kit