Specifications

23
The following are some of
the more common wear
parts which will need to be
removed and replaced in
your G8 style Stitcher
Head. Some common
replacement parts do not
require the Stitcher Head to
be removed from the
stitcher machine. These
parts will be addressed first,
then a more specific
explanation for
disassembling and
replacing wear parts for the
G8 Stitcher Head will
follow.
Removing and Replacing
the Wire Cutters
Figure 17
The Moving Wire Cutter
(G20145) has several
cutting surfaces, each of
which may be used by
rotating the Cutter’s
position on the Cutter
Operating Slide (G20198).
Worn Cutters can cause
In time, you will need to replace some parts in your G8 style Stitcher Head. When this happens, first
locate the needed part in one of the following diagrams. Then locate the DeLuxe Stitcher part
number and contact your Graphic Arts Representative to order the part by the part number,
description and quantity.
Ordering Spare Parts
!
Always power down the stitcher machine
before any maintenance or adjustments
are made to the stitcher head.
rCAUTION
!
Replacing Spare Parts (Figure 16)
Figure 16 - Replacing Spare Parts
G20151
Driver
G20136A
G20183
G20197AA
G20216 (2)
Bender Bar Asy
G20559BA
G20344B
G20154A
G20342