Specifications
The quality and quantity of work that can be
produced by the DeLuxe Stitcher Heads is
dependent upon the operator making the various
operating adjustments as accurately as possible.
The following illustrated instructions are provided
so that the operator will clearly understand how to
make the various required operating adjustments.
G8HD24A, G8HD24B, G8HD24E and G8HD24F
(Slot Mount/Rail Drive)
These G8 Head Models come with a Bonnet
Clamp Block (9002) and Clamp Block Eccentric
(G20124) for use on stitchers with a T-Slot
mounting rail. Refer to Figure 3. Slide the Clamp
Block into the T-slot on the stitcher, as shown. Align
the marks on the Eccentric with those on the Bonnet.
Next, slide the Head onto the Clamp Block and
against the stitcher machine. Make sure the Driving
Slide (G20162BA) and the Adjustment Bar
(G20245 or G20251) are in their respective slots on
the stitcher machine. Rotate the 5mm Hex Key
Wrench (G20362), in the Eccentric as shown, to secure the G8 Head to the stitcher machine.
NOTE: For stitcher machines with no adjustment rail, remove the Cutter Block Adjustment
Bar (G20245 or G20251) and the Cutter Block Adjustment Connector (G20246).
11
Each new G8 Stitcher Head comes fully assembled with the exception of the Complete Wire Guide
Spring Plate Assembly (G20278AA), the Wire Guide Spring (G20279 or G20286) and the Clincher
Plate Assembly (9086A). Slip the Wire Guide Spring Bracket onto the Upper Wire Tube (G20181)
and rotate until the Bracket accommodates the wire payoff of the stitcher machine. Tighten the Socket
Head Cap Screw (G20288) to hold the Wire Guide Spring Bracket Assembly in place.
Attach the Clincher Plate Assembly (9086A) to the clincher mounting rail of the stitcher machine
using the Binder Nuts (2091) and Binder Bolts (9088) provided. Center the Clincher Slide (9084B or
9093A) under the Driver Bar (G20151) and Driver (G20152, G20352 or G20358) of the G8 and leave
the Bolts loose until the Head is firmly positioned. (See Figure 11).
Figure 3 - Removing and Attaching Heads
Mounting
Assembly
9002
G20124
G20362
G20162BA